Thermaltake VERSA J25 RGB Cabinet
- 1 tempered glass on the side, tool-free installation, cable management
- I/ O connections 2x USB 3.0 and 1x HD audio
- 1x 120mm fan, 2x 120mm RGB fan
- CPU cooler max. Height: 160mm, PSU max. Length: 160mm, VGA max. Length: 330mm, motherboards: ATX
Original price was: ₹7,000.00.₹5,150.00Current price is: ₹5,150.00.
Out of stock
Email when stock available
Thermaltake Versa J25 Tempered Glass RGB Edition Mid-Tower Chassis
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.
3 Built-in 120mm 12V RGB Fans
Thermaltake VERSA J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software.
Built-in RGB Switch Board
Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.
Built-in PSU Cover
The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.
Tempered Glass Window
The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels.
Tool-Free Installation
The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives.
Thermaltake VERSA J25 Superior Hardware Support
Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.
Excellent Cooling Capability
Thermaltake VERSA J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.
Angular, Acrylic Front Panel
The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.
Thermaltake VERSA J25 Handy I/O Ports
The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.
| Model | Versa J25 TG RGB |
| P/N | CA-1L8-00M1WN-01 |
| Case Type | Middle tower |
| Dimension (H x W x D) | 461 x 206 x 402 mm(18.1 x 8.1 x 15.8 inch) |
| Net Weight | 6.2 kg / 13.67 lb |
| Side Panel | 4mm Tempered Glass x1 |
| Color | Exterior & Interior : Black |
| Material | SPCC |
| Cooling System | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) Front (intake) : 120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA) |
| Drive Bays | |
| Accessible | 2 x 2.5”(HDD Bracket) |
| Hidden | 3 x 3.5“ or 2.5” (HDD Tray) |
| Expansion Slots | 7 |
| Motherboards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support | Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support | Front: 1 x 360mm Rear: 1 x 120mm |
| Clearance | CPU cooler height limitation: 160mm VGA length limitation: 330mm PSU length limitation: 160mm |
| Warranty | 3 Years |
| Note | ***Features, Price and Specifications are subject to change without notice. |
| Product Type | |
|---|---|
| Motherboard Size | |
| Lighting Profile | |
| Radiator Size | |
| Brands | |
| Case Form Factor | |
| EAN / UPC Code |
Q & A
Thermaltake VERSA J25 RGB Cabinet
Related Products
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Optimized Micro-ATX design
- Tempered glass side panel
- Mesh top and front panel
- Support up to six 120mm or four 140mm cooling fans
- Support for radiators up to 280mm on top and in front
- Removable drive cage
- MSI MAG VAMPIRIC 010 chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- ATX Full Tower
- Tempered glass panels
- The CORSAIR RapidRoute cable management system
- Includes four 140mm CORSAIR SP RGB ELITE PWM fans
- Fit up to 12x 120mm or 7x 140mm cooling fans
- Mini-ITX, Micro-ATX, ATX, E-ATX
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 RGB fans on Front, 1 Non RGB Rear Fan and 6 Pin RGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Metal Construction with Glass Panels
- XPG PRIME™ ARGB Combo Controller
- Efficient Air-Flow Cooling Design
- Modular Tool-Less Design
- Magnetic Dust-Filter, and Front Panels
- Mid-Tower with support for ATX / micro ATX / Mini-ITX Motherboards featuring a brushed aluminium chassis
- Two hinged swing-doors with premium-quality 4mm thick tempered glass design guarantees window durability and viewing capability
- Personalize Your Gaming Rig with a built in 1 to 8 ARGB LED hub and 4 ARGB fans + 1 system fan
- Custom Liquid Cooling Ready features an extractable radiator bracket which supports for radiators up to 360mm in length
- MSI Mystic Light RGB lighting software features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of Mystic Light Sync enabled product
- Preinstalled Fans : Front: 1 x 200mm ARGB LED Fan included, Top: 2 x 200mm ARGB LED Fan included and Rear: 1 x 120mm ARGB LED Fan included
- Black I Mid Tower I 465 X 215 X 400 mm I 4mm Tempered Glass*1 Side Panel
- 3.5″ HDD/HDD Tray : 2+1 (Combo 3.5” + 2.5”) I 2.5″ HDD/SSD Tray : 2+1 (Combo 3.5” + 2.5”)
- I/O Port : x2 USB 3.0 I 1 Hybrid Audio Port I 1 LED Control Button I 1 Reset Button I 1 Power Button
- FRONT: 1 x XPG VENTO 120 Fan I REAR: 1 x XPG VENTO ARGB 120 Fan
- 2 Years Manufacturer Warranty
- Awesome front Panel with RGB strip – The front panel is a combination of a matte finish and mesh bottom along with an intricately placed RGB strip for the perfect look.
- Ample Cooling: Can house eight 120mm fans out of which one rear fan comes pre-installed.
- Dual Dust filters: The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors: Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Well populated IO panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button.
- SUPPORTS ATX / M-ATX / Mini-ITX MOTHER BOARDS
- Quickly control the fan color and lighting effects with Insta-Light Loop at the touch of a button. Click through the profiles at ease and choose a favorite.
- The MAG VAMPIRIC 100 Series reveals your arsenal with a tempered glass side panel. Arm the system with MSI’s liquid cooler, motherboard, and graphics card for the ultimate display of power and performance.
- A magnetic filter sits on the top vents keeping dust from falling inside while being easily removed for cleaning.
- The MAG VAMPIRIC 100 Series has been engineered to focus air flow across the system for incredible cooling performance. Up to 6 fans can be installed.
- The MAG FORGE 111R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
Reviews
There are no reviews yet