Thermaltake VERSA J25 RGB Cabinet
- 1 tempered glass on the side, tool-free installation, cable management
- I/ O connections 2x USB 3.0 and 1x HD audio
- 1x 120mm fan, 2x 120mm RGB fan
- CPU cooler max. Height: 160mm, PSU max. Length: 160mm, VGA max. Length: 330mm, motherboards: ATX
Original price was: ₹7,000.00.₹5,150.00Current price is: ₹5,150.00.
Out of stock
Email when stock available
Thermaltake Versa J25 Tempered Glass RGB Edition Mid-Tower Chassis
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.
3 Built-in 120mm 12V RGB Fans
Thermaltake VERSA J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software.
Built-in RGB Switch Board
Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.
Built-in PSU Cover
The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.
Tempered Glass Window
The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels.
Tool-Free Installation
The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives.
Thermaltake VERSA J25 Superior Hardware Support
Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.
Excellent Cooling Capability
Thermaltake VERSA J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.
Angular, Acrylic Front Panel
The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.
Thermaltake VERSA J25 Handy I/O Ports
The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.
| Model | Versa J25 TG RGB |
| P/N | CA-1L8-00M1WN-01 |
| Case Type | Middle tower |
| Dimension (H x W x D) | 461 x 206 x 402 mm(18.1 x 8.1 x 15.8 inch) |
| Net Weight | 6.2 kg / 13.67 lb |
| Side Panel | 4mm Tempered Glass x1 |
| Color | Exterior & Interior : Black |
| Material | SPCC |
| Cooling System | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) Front (intake) : 120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA) |
| Drive Bays | |
| Accessible | 2 x 2.5”(HDD Bracket) |
| Hidden | 3 x 3.5“ or 2.5” (HDD Tray) |
| Expansion Slots | 7 |
| Motherboards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support | Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support | Front: 1 x 360mm Rear: 1 x 120mm |
| Clearance | CPU cooler height limitation: 160mm VGA length limitation: 330mm PSU length limitation: 160mm |
| Warranty | 3 Years |
| Note | ***Features, Price and Specifications are subject to change without notice. |
| Product Type | |
|---|---|
| Motherboard Size | |
| Lighting Profile | |
| Radiator Size | |
| Brands | |
| Case Form Factor | |
| EAN / UPC Code |
Q & A
Thermaltake VERSA J25 RGB Cabinet
Related Products
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Up to E-ATX MB Support
- 64 Cores CPU
- Quad Channel RAM
- 456 mm Graphics Card
- Create a 8K Video with effects & color matching.
- Never slow down your editing process of caching, pre-calculating effects & layers and the final rendering.
- Synergize the MPG GUNGNIR 110M with a MSI motherboard through the USB 3.2 Gen 2 Type-C port.
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 3 Auto RGB fans plus one system fan and has room for up to 6 fans. Fans are Mystic Light compatible.
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- The MPG GUNGNIR 110M’s front features a filtration panel that lets in maximum airflow.
- Multiple Radiator Mounts – For enthusiast-grade cooling dual 360-millimeter radiators are supported on the top and front panel while a single 240mm is supported on the side to keep the most extreme systems cool.
- Large Storage Options – Dual 2.5” SSD mounts and dual 3.5” HDD mounts the Ant Esports 690 Air is ideal to build any gaming or production system.
- Movable Disk Bracket – The HDD cage under the PSU shroud is movable and can be slid towards the front to make space for long PSUs and increase it to 220mm if needed.
- Spacious Interiors – The spacious interior fits upto an E-ATX motherboard configuration. Support for up to a 390mm graphics card, a 175mm CPU cooler, and up to a 220mm PSU in length provides room for upgrades.
- Four Dust Filters – With magnetic dust filters in the front, side, and top along with a pull tray one on the PSU, the 690 Air facilitates high airflow while filtering out dust particles.
- Awesome front Panel with RGB strip – The front panel is a combination of a matte finish and mesh bottom along with an intricately placed RGB strip for the perfect look.
- Ample Cooling: Can house eight 120mm fans out of which one rear fan comes pre-installed.
- Dual Dust filters: The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors: Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Well populated IO panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button.
- Synergize MPG SEKIRA 100 Series with an MSI motherboard by bridging a USB Gen2 Type-C port with 10 Gbps for convenient access.
- Mid-Tower gaming PC case that supports E-ATX / ATX / M-ATX / Mini ITX
- The MPG SEKIRA 100R comes with 4 fans and has room for up to 6 fans.
- The top vent lid provides additional system airflow and comes with a magnetic dust filter for easy removal and cleaning.
- A total of three filters have been placed to prevent dust from entering the system.
- ATX Mid Tower
- Tempered glass panels
- The CORSAIR RapidRoute cable management system
- Includes three 120mm CORSAIR SP RGB ELITE fans
- Fully control and synchronize the RGB lighting
- Mini-ITX, Micro-ATX, ATX, E-ATX
- ATX Mid Tower
- Corsair 470T Combining a spacious interior
- Tempered Glass
- Fits up to 7x 120mm or 4x 140mm cooling fans
- Includes a 120mm fan
- Mini-ITX, Micro-ATX, ATX, E-ATX
- Metal Construction with Glass Panels
- XPG PRIME™ ARGB Combo Controller
- Efficient Air-Flow Cooling Design
- Modular Tool-Less Design
- Magnetic Dust-Filter, and Front Panels
- Mini-ITX/DTX case: support Mini ITX /DTX motherboards
- Premium aesthetics: 4mm tempered-glass panels with sleek aluminum frame and Aura Sync lighting
- Patented 11°Tilt design & Optimized airflow & Extra cable routing space: With 11° tilt design, providing an additional 40 mm of space at the back of the motherboard for optimal cooling around CPU, GPU ,the M.2 SSD that can be installed on the back of the motherboard, as well as extra space for easy cable management.
- Ready for powerful components: Supports ATX PSU, 3-slot graphics card without a riser cable, up to five fans, 240mm radiator and water-cooling pump and reservoir
In stock
- Two-Tone Design: A stunning two-tone design on the front panel to show off that ARGB fan in the front.
- ARGB Fans: Equipped with 4x ARGB 120mm fans, your customization options are endless.
- Tempered Glass Side Panel: A 4mm tempered glass side panel lets you show off everything you have in your system.
- Insta-Light Loop Button: Create profiles and quickly control the fan color and lighting effects with the Insta-Light Loop button.
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
Reviews
There are no reviews yet