Lian Li O11 Air Mini E-Atx Mid Tower Cabinet With Tempered Glass Side Panel (Black)
- EXTREME AIRFLOW SUPER FINE MESH FRONT, TOP AND SIDE PANELS
- 2 x 140MM FRONT FANS
- UNOBSTRUCTIVE AIRFLOW FOR AIR OR AIO COOLING SETUPS
- SUPPORTS REGULAR SIZED ATX POWER SUPPLY
- UP TO 6 x SSD OR 4 X HDD + 2 X SSD STORAGE
₹9,829.00
Lian Li O11 Air Mini E-Atx Mid Tower Cabinet With Tempered Glass Side Panel (Black)
O11 AIR MINI
Small tower with big airflow, the Lian Li O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, Lian Li O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow.
EXTREME AIRFLOW SUPER FINE MESH FRONT, TOP AND SIDE PANELS
The mesh design on the front, top and side panels of the Lian Li O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case.
2 x 140MM FRONT FANS
The Lian Li O11 AIR MINI comes with 2 x 140mm PWM front fans and 1 x 120mm PWM rear fan pre-installed straight out of the box. Get your system up and running faster with ease.
SIZE COMPARISION O11 AIR MINI vs. O11 AIR
The AIR MINI is more compact in size than the original O11 AIR,
but interior space is just as accommodating and improves on cooling performance.
AIO WATERCOOLING
The Lian Li O11 AIR MINI also accommodates AIO watercooling with enough installation space for 240mm or 280mm radiators on the top, side and bottom.
UNOBSTRUCTIVE AIRFLOW FOR AIR OR AIO COOLING SETUPS
Designed with optimized mesh pattern on the front, top and side panels, the O11 AIR MINI provides exceptional focused airflow and overall system airflow for both air cooling setups and AIO setups. The spacious interior allows for different fan or radiator configurations to maximize the cooling temperature.
BUILT WITH THE FINEST MATERIALS
The Lian Li O11 AIR MINI black has a premium hairline brushed aluminum that looks as good as it feels. The O11 AIR MINI white has a minimalist white powder coating. The durable tempered glass allows for easy and carefree maintenance and for showing off the internal components.
MODULAR BACK PANELS FOR COMPATIBILITY
7-slot or 5-slot back panels are included. 7-slot back panel for ATX, M-ATX, ITX motherboards and 5-slot back panel for M-ATX, ITX motherboards.
SUPPORTS REGULAR SIZED ATX POWER SUPPLY
Lian Li O11 AIR MINI supports up to 200mm long full ATX PSUs to easily swap the power from another system and run the most power hungry systems.
UP TO 6 x SSD OR 4 X HDD + 2 X SSD STORAGE
All storage is tucked away behind the motherboard tray.
A total of 6 x 2.5” drives or 4 x 3.5” + 2 x 2.5” drives can be installed with dedicated mounts for storage.
| Product Name | O11 Air Mini |
| Model | G99.O11AMX.IN |
| Color | Black |
| Dimension | 400 x 288 x 384 mm |
| Material | 4mm Aluminum Panel 0.8mm Mesh Panel 4.0 mm Tempered Glass |
| Motherboard Support | E-ATX (Max 280 mm wide)/ ATX/ Micro-ATX/ Mini-ITX |
| Psu Support | ATX (Max. 200 mm) |
| Included Fan | (Front) 2 X 140mm PWM Fan (Rear) 1 X 120mm PWM Fan |
| Fan Support | (Top) 120mm X3 / 140mm X2 (Side) 120mm X2 (Bottom) 120mm X2/ 140mm X2 (Front) 120mm X2/ 140mm X2 (Rear)120 mm X1 |
| Radiator Support | (Top) 240mm or 280mm (Side) 240mm (Bottom) 240mm or 280mm (Front) 240mm or 280mm |
| Drive Support | 6 X 2.5” SSD or 2 X 2.5” SSD + 4 X 3.5” HDD |
| Gpu Length Clearance | 362 mm |
| Cpu Height Clearance | 170 mm |
| Expansion Slots | 7 or 5 (depends on the back panel) |
| I/O Ports | 2 X USB 3.0 1 X USB 3.1 Type-c 1 X HD Audio |
| Dust Filter | 1 × removable bottom dust tray |
| Warranty | 1 Year |
| Note* | Price, feature and specifications are subject to change without notice. |
Lian Li O11 Air Mini E-Atx Mid Tower Cabinet With Tempered Glass Side Panel (Black)
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Grey I Mid Tower I 465 X 285 X 459 mm I Steel inside, Aluminium front panel
- Bottom：2.5” SSD × 4 or 3.5” HDD × 2 I Side：2.5” SSD × 4 or 3.5” HDD × 2 I Drive Cage：2.5” SSD × 3 or 3.5” HDD × 2 + 2.5” SSD × 1 I Cable Management Bar：2.5” SSD × 2
- 2 × USB 3.0 I 1 × USB 3.1 TYPE-C I 1 × HD AUDIO/ MIC I LED Color and Mode button I Reset Button I Power Button
- FAN SUPPORT : Top: 120mm × 3 or 140mm × 2 I Side: 120mm × 3 or 140mm × 2 I Bottom: 120mm × 3 or 140mm × 2 I Rear: 120mm × 1 I On Drive Cage: 60mm × 1
- 1 Year Manufacturer Warranty
- Huge dual-chamber mid-tower case with an addressable RGB strip alongside the front panel.
- The front lighting effect can be controlled through the M|C buttons on the front; switch to the 8th mode you’ll be able to sync it with the motherboard.
- Front and left-side panel in tempered glass combined with premium aluminum top and right-side panel.
- Spacious interior for a huge motherboard and 446mm long graphics cards.
- Optimized internal design to accommodate 3 x 360mm radiators and 10 x 120mm fans.
- Equipped with two hot-swappable bays, which allows you to remove and replace the 4 x HDD/SSD without shutting down the system.
- 2 x USB 3.0 on the top right and 2 x USB 3.0 bottom right to be more ergonomic whether the case is placed on or under the desk.
- Mesh Panels at the top, front and rear, providing extreme airflow
- Modular backplate (5 + 2 expansion slot), supporting MINI-ITX up to E-ATX MB
- Included 2 x 140MM PWM fans at the front, and a 120mm PWM fan at the rear
- Support 6 x 2.5” SSD or 4 x 3.5” HDD + 2 x 2.5” SSD
- Mid-tower chassis configurable for air cooling and water cooling
- Airflow optimized front, top and PSU shroud side mesh panels
- Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
- Supports 360 radiator at the top, front and a maximum of 10 fans
- White I Mid Tower I 465 X 285 X 459 mm I Steel inside, Aluminium front panel
- Bottom：2.5” SSD × 4 or 3.5” HDD × 2 I Side：2.5” SSD × 4 or 3.5” HDD × 2 I Drive Cage：2.5” SSD × 3 or 3.5” HDD × 2 + 2.5” SSD × 1 I Cable Management Bar：2.5” SSD × 2
- 2 × USB 3.0 I 1 × USB 3.1 TYPE-C I 1 × HD AUDIO/ MIC I LED Color and Mode button I Reset Button I Power Button
- FAN SUPPORT : Top: 120mm × 3 or 140mm × 2 I Side: 120mm × 3 or 140mm × 2 I Bottom: 120mm × 3 or 140mm × 2 I Rear: 120mm × 1 I On Drive Cage: 60mm × 1
- 1 Year Manufacturer Warranty
- Front: Tempered Glass + Aluminum
- 10 X 2.5” SSD or 6 X 2.5” SSD + 4 X 3.5” HDD
- Radiator Support: 3 X 120 mm (side) + 1 X 120 mm (rear) + 3 X 120 mm/2 x 140 mm (base) + 3 X 120 mm/2 x 140 mm (top) (Optional)
- Front I/O Panel: 4 X USB 3.0 (2 on the front, 2 at the front case feet), 1 X USB 3.1 TYPE-C, 1 X HD AUDIO
- Full Aluminum Exterior / Exterior Mesh Panel for best possible airflow / Front ARGB Lighting / Push-pull Hinged Glass Panels / Dual Side Tinted Tempered Glass Panel / Toolless SSD Mounting / Rotatable PSU Bracket for thicker bottom radiator
- The V3000 PLUS can be set in Mode 1 as standard build, Mode 2 for a rotated motherboard with a unique look, or Mode3 as dual system
- IN PURSUIT OF PERFORMANCE – V3000 PLUS is designed with enthusiast-level customer water-cooling in mind, leveraging its spacious room for custom loops and endless possibilities
- POWERFUL POTENTIAL – 2 reservoir mounting plates are included for D5 or DDC pump, allowing configuration personalization
- CABLE ROUTING SPACE – with cable management in mind. V3000 PLUS offers 5 small Velcro straps and 2 large multi-layer ones to create a clear routing path
- The rear tempered glass panel featured a dark tint to keep the cables as hidden as possible
- Black, Mid- Tower, (D) 526 x (W) 238 x (H) 523 mm, Aluminum 4.0mm tempered glass (both sides)
- Behind MB Tray: 2 X 2.5ʹʹ SSD , Hard Drive Cage: 4 X 3.5ʹʹ HDD/2.5ʹʹ SSD , Behind the Right-side Shroud Panel: 3 X 2.5ʹʹ SSD Above , PSU Chamber:3 X 2.5ʹʹ SSD
- Power Button, Reset Button, C Mode, M mode, USB 3.0 * 2, Audio *1
- Pre-Installed Fans : 3 x 140mm ARGB Front Fans and 1 x 140 mm PWM Rear Fan ; Fan Support : Front (multi-way bracket): 3 X 120mm or 3 X 140mm, Above PSU Chamber: 3 X 120mm or 2 X 140mm Top: 3 X 120mm or 3 X 140mm Rear: 1 X 120mm or 1 X 140mm ; Radiator Support : Front / Top / Bottom : 360mm
- GPU Length Clearance : 420mm(Max) ; CPU Cooler Height Clearance : 185mm(Max) ; Dust Filter : 1 x Bottom
- Mesh Panels at the top, front and rear, providing extreme airflow
- Modular backplate (5 + 2 expansion slot), supporting MINI-ITX up to E-ATX MB
- Included 2 x 140MM PWM fans at the front, and a 120mm PWM fan at the rear
- Support 6 x 2.5” SSD or 4 x 3.5” HDD + 2 x 2.5” SSD
- White, Mid- Tower, (D) 526 x (W) 238 x (H) 523 mm, Aluminum 4.0mm tempered glass (both sides)
- Behind MB Tray: 2 X 2.5ʹʹ SSD , Hard Drive Cage: 4 X 3.5ʹʹ HDD/2.5ʹʹ SSD , Behind the Right-side Shroud Panel: 3 X 2.5ʹʹ SSD Above , PSU Chamber:3 X 2.5ʹʹ SSD
- Power Button, Reset Button, C Mode, M mode, USB 3.0 * 2, Audio *1
- Pre-Installed Fans : 3 x 140mm ARGB Front Fans and 1 x 140 mm PWM Rear Fan ; Fan Support : Front (multi-way bracket): 3 X 120mm or 3 X 140mm, Above PSU Chamber: 3 X 120mm or 2 X 140mm Top: 3 X 120mm or 3 X 140mm Rear: 1 X 120mm or 1 X 140mm ; Radiator Support : Front / Top / Bottom : 360mm
- GPU Length Clearance : 420mm(Max) ; CPU Cooler Height Clearance : 185mm(Max) ; Dust Filter : 1 x Bottom
- Mid-tower chassis configurable for air cooling and water cooling
- Airflow optimized front, top and PSU shroud side mesh panels
- Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
- Supports 360 radiator at the top, front and a maximum of 10 fans
Reviews
There are no reviews yet