Thermaltake ToughFan 14 High Static Pressure Radiator 2 Fan Pack
- Unparalleled Cooling Performance
- Exceptional Blade Design
- Metal-Reinforced Motor Hub
- The 2nd Generation Hydraulic Bearing
- Designed for All Cooling Applications
Original price was: ₹6,490.00.₹3,730.00Current price is: ₹3,730.00.
Out of stock
Email when stock available
Thermaltake ToughFan 14 High Static Pressure Radiator 2 Fan Pack
Feature
Thermaltake TOUGHFAN PWM-controlled high static pressure fan features an optimized structure to maximize high-end cooling needs.
Unparalleled Cooling Performance
The TOUGHFAN is a PWM controlled fan which is designed to perform at a maximum operating speed of up to 2000 RPM allowing unparalleled cooling performance.
The 2nd Generation Hydraulic Bearing
The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
Built for Superior Cooling
The TOUGHFAN is designed for all cooling applications. It’s your perfect go to solution whether your using it as radiator fan or on a air cooler. Level up with the TOUGHFAN for superior cooling performance.*1. Designed for all air cooling applications. (119.1 CFM & 3.54 mm-H2O)
*2. Best for radiator fans. (With higher static pressure than other standard cooling fans)
*3. Best for air coolers. (With higher static pressure than other standard cooling fans)
Anti-Vibration Mounting System
The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation.
- Unparalleled Cooling Performance: The TOUGHFAN is a PWM controlled fan which is designed to perform at a maximum operating speed of up to 2000 RPM allowing unparalleled cooling performance.
- Exceptional Blade Design: Featuring extreme tensile strength and low thermal expansion coefficient materials, the fan blade is built with special liquid crystal polymer (LCP), a compound which minimizes vibration when the fan is operating at full speed.
- Metal-Reinforced Motor Hub: The TOUGHFAN’s center is constructed with a full steel motor hub providing enhanced stability and durability.
- The 2nd Generation Hydraulic Bearing: The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation.
Exceptional Blade Design
Featuring high tensile strength and low thermal expansion coefficient materials, the fan blade is built with special liquid crystal polymer (LCP), a compound which minimizes vibration when the fan is operating at full speed.
Anti-Vibration Mounting System
The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation.
| General | |
|---|---|
| Brand | Thermal Take |
| Model | CL-F085-PL14BL-A |
| Spec | |
| Weight | 780g |
| Dimension | 140 x 140 x 25 mm |
| Type | Cooling Fan |
| Fan Size | 140 x 140 x 25 mm |
| Color | Black / Gray |
| Noise level | 33.2 dB-A |
| Airflow | 119.1 CFM |
| Speed (RPM) | 1300 RPM |
| Product Type | |
|---|---|
| Fan Size | |
| FAN Speed | |
| Case Fan Pack | |
| Brands | |
| EAN / UPC Code |
Q & A
Thermaltake ToughFan 14 High Static Pressure Radiator 2 Fan Pack
Related Products
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Material Fibre-glass reinforced polyamide
- Blade geometry Heptaperf
- Size : 120x120x25 mm
- Connector & pin configuration 4-pin PWM
- Low-Noise Adapter (L.N.A.)
- 4 Vibration-Compensators
In stock
- Arctic P12 120mm PWM-controlled fan which regulates fan speed based on load
- 300-2100rpm at 12V providing a maximum airflow of 56.3 CFM
- Low-noise blades design increases airflow and minimizing fan noise
- Fluid dynamic bearing significantly extends service life
- 6-year limited warranty
- Deepcool RF120 FS Dazzling preset lighting effect (purple/blue/orange) from 6 high-brightness, long-lasting LEDs.
- Optimized 9 fan blades design, balancing air flow and wind pressure.
- PWM smart adjustment technology, effectively reducing wind noise.
- 4-pin power connector for high-performance and stability.
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
- Fluid Dynamic bearing
- Built in 10 RGB effects with three button controller
- Compatible with motherboard 5V addressable header
- Fan Speed: 900~1800 RPM
- Max. Air Flow: 57.97 CFM
- It’s part of a triple pack and is known for its high static airflow.
- The fan features 12 Addressable RGB LEDs.
- It ensures high speeds and low noise.
- It’s a great choice for enhancing a PC’s cooling.
- It adds a touch of style with the ARGB lighting.
- 16.8 Million Color LED Ring Design
- Switch LED Modes with ARGB Controller
- PWM Controlled Fan with 9 Fan Blade Design
- Hydraulic Bearing with Low-Noise Design
- Air volume: 57 CFM
- Maximum speed: 2000+-10% rpm
- Avg. Noise: <=27db
- Rated current: 0.23A
- Hydraulic Ball Bearing
- 3 Pin 5V Addressable RGB
- Less turbulence thanks to aerodynamic stator struts
- Supports ASUS AURA, Gigabytes Fusion MSI Mystic Light and others
- Trip Wire provides a micro-turbulent layer for enhanced blade efficiency
- Supports chaining to simplify cable management
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 3000 RPM
- Blade geometry A-Series with Flow Acceleration Channels
- The NeonMaker is a new and innovative approach to adjusting the RGB lighting on the Riing Quad fans, allowing users to customize lighting profiles and orchestrate their own light shows.
- Thermaltake Riing Quad 14 Create fascinating lighting effects with our NeonMaker Light Editing Software
- The hydraulic bearing self-lubricates with a high-quality, friction-reducing substance, which lowers operation noise while improving thermal efficiency.
- Riing Quad’s PWM controlled fan is designed with 9 blades and is engineered to generate higher airflow without compromising on ultra-silent operation.
- Thermaltake Riing Quad 14 The In-mold injection anti-vibration rubber pads allow the fan to spin at higher levels without compromising noise levels.
Reviews
There are no reviews yet