Arctic P12 Slim PWM PST Cabinet Fan (Single Pack)
- Arctic P12 120mm PWM-controlled fan which regulates fan speed based on load
- 300-2100rpm at 12V providing a maximum airflow of 56.3 CFM
- Low-noise blades design increases airflow and minimizing fan noise
- Fluid dynamic bearing significantly extends service life
- 6-year limited warranty
₹599.00
Email when stock available
Arctic P12 Slim PWM PST Cabinet Fan (Single Pack)
Features:
Arctic P12 Ideal where space is limited
Unlike normal case fans, which are 25 mm thick, the P12 Slim PWM PST has an installation depth of only 15 mm. This makes it a predestined fan for small form factor builds.
OPTIMISED FOR STATIC PRESSURE
During the development of the new P12 Slim PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Slim PWM PST is particularly suitable for use on covered case vents or inlets with filters.
MORE EFFICIENT TECHNOLOGY
The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 Slim PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.
MAXIMUM QUIETNESS, MINIMUM VIBRATION
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
EXTENDED LIFE SPAN
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
300 TO 2100 RPM REGULATED VIA PWM PST
With a wide range of regulation and the PWM Sharing Technology (PST), the P12 Slim PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
TWO WAY INSTALLATION
Push warm air out of the case
Pull cool air into your case
| Brands | |
|---|---|
| Fan Size | |
| FAN Speed | |
| Case Fan Pack | |
| EAN / UPC Code |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Connector & pin-configuration : 4-pin PWM I Rotational speed : 1850RPM
- Cable length : 20cm + 30cm NA-EC1 extension cable I Low-Noise Adaptor
- Frame technology : AAO (Advanced Acoustic Optimisation)I Blade geometry : A-Series with Flow Acceleration Channels
- Max. input power : 1,56 W I Operating voltage : 12 V
- 6 Year Warranty
- FAN DIMENSION : 120mm x 120mm x 25mm
- RATED VOLTAGE : DC 12V (LED Voltage 5V)
- FAN SPEED : 800±200 (30%DUTY) ~ 1900 RPM±10%
- BEARING TYPE : Fluid Dynamic Bearing (FDB)
- Nine-blade design offers a higher airflow and quiet cooling solution for the best performance.
- PWM capabilities built-in to precisely control the speed to achieve optimized fan curve.
- Rigid frame design and included rubber dampeners helps to prevent vibration
- Low-noise operation without sacrificing performance
In stock
Octagonal ARGB Lights
Unique and unorthodox octagonal ARGB diffusers on both sides for distinctive looks and even looks.
Hydraulic Bearing Gear Motor
Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Long Life Span
Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
Shock-Absorbing Pads
Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
- Ring + blade A-RGB LED lighting.
- Wire controller included.
- Support A-RGB motherboard synchronization.
- Balanced cooling performance and noise level
- Optimum Cooling – Rated at 1200 RPM these fans produce 38 CFM of high static pressure to deliver optimum cooling in all conditions.
- Long Life span – With their hydraulic bearing hub these fans are rated at continuous 30,000 hours of lifespan.
- Silent Performance – Due to its noise dampening rubber shims these fans produce a mere 20 dBA of noise at 1200 RPM for that silent performance.
- Crystallized ARGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
- Colour : Black I Fan DimensionsFan Dimensions :120×120×25 mm
- Fan Speed : 1850RPM I Fan Connector : 4-pin PWM
- Bearing Type: Fluid Dynamic Bearing I Fan Airflow : 68.99 CFM
- Deepcool FK120 Fan Air Pressure : 2.19 mmAq I Fan Rated Voltage : 12 VDC
- 1 Year Manufacturer Warranty
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 1500 RPM
- Blade geometry A-Series with Flow Acceleration Channels
- DeepCool CF120 Can be easily controlled by MB through 5V A-RGB Header, no additional controller needed, and can synchronize with other A-RGB devices
- DeepCool CF120 Fan speed can be intelligently controlled by MB in accordance with temperature
- Better balance on air volume & air pressure, low noise, can be used as a case fan or CPU cooling fan
- WS2812B ADD-RGB LED is applied and the below 3pin ADD-RGB Headers are compatible for the device: 5V/D/G and 5V/D/NC/G, which is used for the mainstream M/B brands like ASUS, Gigabyte
- MF120 GT 20 Addressable RGB LEDs across a unique X frame design
- Fine-tuned dual-layer fan blades
- Mainstream motherboard RGB software support
- Wide range PWM control
- Daisy-Chain Function – Each DeepCool FC120 fan features a single cable that transmits both power and RGB data signals that can be daisy-chained in a series of fans to reduce cable clutter.
- Six Bright ARGB LEDs – Indvidually addressable RGB LEDs surround each fan hub and shine through the translucent fan blades for dynamic RGB lighting.
- Onboard Lighting Preset – A default RGB lighting preset is available without the need for a dedicated RGB controller or software, just power on the PWM fan and enjoy the show.
- Motherboard RGB Control – Easily sychronize lighting effects to the rest of your system without needing a hub thanks to the daisy-chain cable for simple RGB software control.
Reviews
There are no reviews yet.