Montech Air Fan P120 2 Pack
- 4Pin PWM Design
- Durable Low Noise FDB Bearing System
- High Cooling Performance Low Noise
- High Performance Fan Blades
- Proprietary Enhanced Fan Frame
- 2 in 1 Solution
Original price was: ₹2,500.00.₹1,155.00Current price is: ₹1,155.00.
Premium Cooling Capability
Unmatched Cost Per Performance
The Air Fan P120 is Montech’s definitive cooling solution for those not looking for RGB lighting and all focuses on performance, low noise and quality.
Our proprietary Enhance Fan Frame and High Performance Fan Blade’s deliver substantial cooling capability but also limits noise emission to reasonable levels. Together with the highly durable low noise FDB bearing system the Air Fan P120 is a perfect match for liquid cooling, air cooling and case cooling systems.
PWM Smart Temp Control
The Air Fan P120 uses smart PWM control, fan speeds will regulate based on system temperature. It Spins faster when heat is higher and lowers RPM under lower loads to effectively and efficiently balance noise and performance only when needed.
High Performance Fan Blades
The Air Fan P120 has taken a large step in fan blade optimization. The outcome is a higher airflow and air pressure blade design.
While at the same time the blades keeps windshear noise controlled and reasonable.
Max RPM — 1,500 RPM
Max Airflow — 73 CFM (ft3 /mm)
Max Noise — 10~27 dBA
Highly Durable FDB Bearing System
With a Fluid Dynamic Bearing (FDB) system, the bearing fluid greatly lowers resistance, vibrations and wear. This greatly increase efficiency, and also makes the fan highly durable to use and wear. Compared to market competitors, the Air Fan P120 can deliver lower noise and cooling performance. Stability at the bearing also means a more durable product without comprise in performance.
Proprietary Enhanced Fan Frame
Montech’s Proprietary Enhanced Fan Frame has the benefit of reduced turbulence and lower noise. Effectively improving overall efficiency and performance.
2 in 1 Solution
The Air Fan P120 comes as a 2in1 solution. Included in each package is a 1to3 PWM splitter that allows you to plug in to as much as 3 P120’s to each 4Pin PWM connector on your mainboard.
| Model | AIR FAN P120 |
| Color | Black |
| Size | 120*120*25mm |
| Speed | 600~1500 RPM ± 10% R.P.M |
| Noise | 10~27 dBA |
| Max. Airflow | 73 CFM(ft3/min) |
| Air Pressure | 1.71 mmH₂O |
| Voltage | DC 12V |
| Rated Voltage | 10.8~13.2V |
| Power Consumption | 1.92W + 10% |
| FAN Connector | 4Pin PWM |
| Content | PWM Fan*2 / 1to3 PWM splitter *1 |
| Warranty | 1 Year |
| Note | ***Features, Price and Specifications are subject to change without notice. |
Q & A
Montech Air Fan P120 2 Pack
Related Products
- Connector & pin-configuration : 4-pin PWM I Rotational speed : 1850RPM
- Cable length : 20cm + 30cm NA-EC1 extension cable I Low-Noise Adaptor
- Frame technology : AAO (Advanced Acoustic Optimisation)I Blade geometry : A-Series with Flow Acceleration Channels
- Max. input power : 1,56 W I Operating voltage : 12 V
- 6 Year Warranty
- LED ARGB
- Size 120 mm
- Pack Three
- Fan Controller Yes
- Fan Dimension : 120×120×26.5 mm
- FAN Speed : 500~1800 RPM±10% ; Fan Air Flow : 52.5 CFM
- Fan Air Pressure : 2.08 mmAq ; Fan Noise Level: ≤28.8 dB(A)
- Fan Connector : 4-Pin PWM ; FAN Rated Voltage : 12VDC
- FAN Rated Current : 0.18A ; FAN Power Consumption : 2.16W
- Dazzling preset lighting effect (purple/blue/orange) from 6 high-brightness, long-lasting LEDs.
- Optimized 9 fan blades design, balancing air flow and wind pressure.
- PWM smart adjustment technology, effectively reducing wind noise.
- 4-pin power connector for high-performance and stability.
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 1500 RPM
- Blade geometry A-Series with Flow Acceleration Channels
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
- The NeonMaker is a new and innovative approach to adjusting the RGB lighting on the Riing Quad fans, allowing users to customize lighting profiles and orchestrate their own light shows.
- Thermaltake Riing Quad 14 Create fascinating lighting effects with our NeonMaker Light Editing Software
- The hydraulic bearing self-lubricates with a high-quality, friction-reducing substance, which lowers operation noise while improving thermal efficiency.
- Riing Quad’s PWM controlled fan is designed with 9 blades and is engineered to generate higher airflow without compromising on ultra-silent operation.
- Thermaltake Riing Quad 14 The In-mold injection anti-vibration rubber pads allow the fan to spin at higher levels without compromising noise levels.
- Size : 120x120x25 mm
- Connector & pin configuration 4-pin PWM
- Low-Noise Adapter (L.N.A.)
- 4 Vibration-Compensators
In stock
- Connector & pin- configuration : 4-pin PWM I Rotational speed : 1700 RPM
- Cable length : 40cm I Acoustical noise : 25,1 dB(A)
- Blade geometry : Pressure-optimized Nine Blade Design with Vortex-Control Notches
- Max. input power : 1,08 W I Operating voltage : 12V
- 6 Year Warranty
- Less turbulence thanks to aerodynamic stator struts
- Supports ASUS AURA, Gigabytes Fusion MSI Mystic Light and others
- Trip Wire provides a micro-turbulent layer for enhanced blade efficiency
- Supports chaining to simplify cable management
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Material Fibre-glass reinforced polyamide
- Blade geometry Heptaperf
- Shine brillianty: six individually addressable hub-mounted RGB LEDs
- Pwm control: wide speed range ideal for CPU heatsinks and radiators
- Specially designed fan blades and outer ring: produces an exceptionally uniform glow
- Ells (Long Life Sleeve) bearings: silent operation with a long lifespan
Reviews
There are no reviews yet