Lian Li UNI Fan SL Infinity 140 Reverse Blade (White)
• Infinity mirror look all around
• Reversed Blade fan that intakes air while seeing the infinity effect
• Only one cable is required for a cluster of fans
• Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
• 40 LEDs in each fan
• Quick PIN connection to provide ease of installation
• Optimized for mounting at the bottom of the case or on top of the radiator
Original price was: ₹5,999.00.₹3,549.00Current price is: ₹3,549.00.
Out of stock
Email when stock available
Feature
Infinity Mirror ARGB Fan
Introducing a new look to PC fans and a new level of installation simplicity and light effect customizability.
CONSISTENT APPEARANCE
No matter intake or exhaust SL-INF fans
INFINITY MIRROR FAN
A combination of the original Lian Li UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.
CENTERED INFINITY MIRROR ARGB
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
SIDE FRAME ARGB
Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.
ALUMINUM TRIM SURROUNDED INFINITY MIRROR
Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.
REAR RIM OF LED AROUND THE ALUMINUM LOGO
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
UNPRECEDENTED MODULARITY
The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.
DAISY CHAIN FAN
A pin-to-pad contact point passes the signal and power through the fan cluster.
REMOVABLE KEYLOCK
The interlocking key on each fan is now removable to improve compatibility with radiators fittings.
REVERSIBLE CABLE MODULE
The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.
UNCOMPROMISED PERFORMANCE
The UNI FAN SL-INF Reverse blade operates with a slightly higher noise level with a better airflow (63.6 CFM Max) comparing to the original UNI FAN SL-INF.
LOWER WIND NOISE
When installed as intake fan with the reverse blade, the wind noise is lower than the regular blade.
Note: More obvious when installed on a radiator
THE SAME CONTROLLER AS SL-INF
16 FANS IN ONE GO FOR EACH GROUP OF FANS
The included controller is in the SLIN120 Triple Pack,supporting up to 16 fans (4 fans in each group) and 2 SM-type connecting devices.
L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANS
Control and preview with precision the lighting effect of the SL-Infinity fans with the new L-Connect interface.
Note: Only available when connecting via a UNI FAN SL-INFINITY controller, controller is sold separately or included in triple pack regular fan.
❶ Select lighting effect of blades / fan frame / both LED
❷ Set personalized color / brightness / speed / direction
ENDLESS LIGHTING EFFECTS
Similar to the AL fans, L-Connect 3 can set the lighting effects of the SL-Infinity fans for both the fan blades and the fan frame inner edges separately, or go with pre-set combined lighting effects.
Option 1. Set the fan blade and inner fan frame lighting modes individually to achieve a custom look.
Fan Blade & Center Infinity Mirror LED
Angle Fan Frame & Side Infinity Mirror LED
Fan Blade & Center Infinity Mirror + Angle Fan Frame & Side Infinity Mirror LED
INTELLIGENT START/ STOP FAN
Unique to the SL-Infinity fans, L-Connect 3 features a Start/ Stop mode to completely stop the fan when the CPU or GPU is running below your set temperature (the maximum 50°C), achieving minimal acoustic levels when the system is at low temperature.
SYNC FAN SPEED TO MOTHERBOARD
L-Connect 3 now offers an option to sync fan speed to the motherboard, also known as the PWM mode in the earlier L-Connect version.
∎ Click to pass fan speed control to motherboard
QUICK SYNC LIGHTING WITH UNI FAN SL/ AL AND STRIMER PLUS V1/V2
The quick sync function saves time to synchronize all LIAN LI device lighting effects with one click. Moreover, synchronize all devices to the motherboard software with one click.
∎ Click to pass lighting control to motherboard
| Model Name | UNI FAN SL-INF 140 |
| Model No. | 14RSLIN1W WHITE |
| Color | White |
| Number of Fans | 1 |
| Controller | No |
| Material | PBT/PC/Aluminum |
| Fan Dimension | 140 X 142 X 25 (mm) |
| Rated Voltage | DC 12V (FAN) & 5V (LED) |
| Fan Speed | 0, 200-1600 RPM |
| Air Pressure | 2.95 mmH2O (Maximum) |
| Airflow | 71.6 CFM (Maximum) |
| Acoustic Noise | 28.6 dB(A) |
| Locked Current | ≦390mA |
| Bearing Type | Fluid Dynamic Bearing (FDB) |
| Operation Voltage | DC 12V & 5V |
| Start-Up Voltage | ≦6V |
| Input Current | 130mA (FAN) / 600mA (LED) |
| Input Power | 4.56W |
| Warranty | 2 years |
Q & A
Lian Li UNI Fan SL Infinity 140 Reverse Blade (White)
Related Products
- Less turbulence thanks to aerodynamic stator struts
- Supports ASUS AURA, Gigabytes Fusion MSI Mystic Light and others
- Trip Wire provides a micro-turbulent layer for enhanced blade efficiency
- Supports chaining to simplify cable management
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
- LED RGB
- Size 120 mm
- Pack Single
- Fan Controller No
- Simple assembly with interlocking and daisy chain functionality
- Only two cables required for a cluster of fans
- Aesthetic look with aluminum medallion and LEDs on both sides
- Customized LEDs on fan blades and the inner edge of the fan frame
- Multiple lighting effects/fan speed control via L-connect software
- Improved static pressure and airflow while remaining silent
- Fluid Dynamic bearing
- Built in 10 RGB effects with three button controller
- Compatible with motherboard 5V addressable header
- Fan Speed: 900~1800 RPM
- Max. Air Flow: 57.97 CFM
- The NeonMaker is a new and innovative approach to adjusting the RGB lighting on the Riing Quad fans, allowing users to customize lighting profiles and orchestrate their own light shows.
- Thermaltake Riing Quad 14 Create fascinating lighting effects with our NeonMaker Light Editing Software
- The hydraulic bearing self-lubricates with a high-quality, friction-reducing substance, which lowers operation noise while improving thermal efficiency.
- Riing Quad’s PWM controlled fan is designed with 9 blades and is engineered to generate higher airflow without compromising on ultra-silent operation.
- Thermaltake Riing Quad 14 The In-mold injection anti-vibration rubber pads allow the fan to spin at higher levels without compromising noise levels.
- Dazzling preset lighting effect (purple/blue/orange) from 6 high-brightness, long-lasting LEDs.
- Optimized 9 fan blades design, balancing air flow and wind pressure.
- PWM smart adjustment technology, effectively reducing wind noise.
- 4-pin power connector for high-performance and stability.
- Connector & pin- configuration : 4-pin PWM I Rotational speed : 1500 RPM
- Cable length : 40cm I Acoustical noise : 25,8 dB(A)
- Blade geometry : Pressure-optimised Nine-Blade Design with Vortex-Control Notches
- Max. input power : 2, 4 W I Operating voltage : 12V
- 6 Year Warranty
- Connector & pin- configuration : 4-pin PWM I Rotational speed : 1700 RPM
- Cable length : 40cm I Acoustical noise : 25,1 dB(A)
- Blade geometry : Pressure-optimized Nine Blade Design with Vortex-Control Notches
- Max. input power : 1,08 W I Operating voltage : 12V
- 6 Year Warranty
- 16.8 Million Color LED Ring Design
- Switch LED Modes with ARGB Controller
- PWM Controlled Fan with 9 Fan Blade Design
- Hydraulic Bearing with Low-Noise Design
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 1500 RPM
- Blade geometry Heptaperf
Crystalized ARGB Lights
Unique and unorthodox crystalized ARGB diffusers on both sides fordistinctive looks and even looks.
Hydraulic Bearing Gear Motor
Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Long Life Span
Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
Shock-Absorbing Pads
Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
Reviews
There are no reviews yet