Lian Li O11D-Mini (PCI-E 4.0 X16) Vertical GPU Bracket Kit With 200mm Riser Cable For O11Dynamic Mini (White)
- Replace the back panel of O11D MINI with the Vertical GPU Bracket Kit to display the front design of the graphics card. Simply remove the modular back panel of O11D MINI and mount the bracket on.
- The vertical GPU bracket kit back panel can be adjusted up and down, providing more clearance for the fans and radiator installed at the bottom of the case. This sets the motherboard location in an O11D MINI 7 slots mode or 5 slots mode.
Original price was: ₹11,399.00.₹6,339.00Current price is: ₹6,339.00.
Lian Li O11D-Mini (PCI-E 4.0 X16) Vertical GPU Bracket Kit With 200mm Riser Cable For O11Dynamic Mini (White)
Features
O11DMINI-1 VERTICAL GPU BRACKET KIT
Vertical GPU mount accessory for the black and white O11D-Mini which includes a 200mm long PCIe Gen4 x16 riser cable. Allows showing graphic card with simple installation and different configurations.
SIMPLE INSTALLATION
Replace the back panel of Lian li O11D-MiniI with the Vertical GPU Bracket Kit to display the front design of the graphics card. Simply remove the modular back panel of O11D-Mini and mount the bracket on.
OPTIONAL CONFIGURATION MODES
The vertical GPU bracket kit back panel can be adjusted up and down, providing more clearance for the fans and radiator installed at the bottom of the case. This sets the motherboard location in an O11D MINI 7 slots mode or 5 slots mode.
Simple installation
Replace the back panel of O11D MINI with the Vertical GPU Bracket Kit to display the front design of the graphics card. Simply remove the modular back panel of O11D MINI and mount the bracket on.
2 optional configuration modes
The vertical GPU bracket kit back panel can be adjusted up and down, providing more clearance for the fans and radiator installed at the bottom of the case. This sets the motherboard location in an O11D MINI 7 slots mode or 5 slots mode.
Gen 4.0 PCIe riser cable
The latest PCIe 4.0 supports transfer rates of 16GT/s bit rate. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offers great performance, and shows off the GPU at a great new angle.
Note: The GPU performance can be affected by other components in the system, not only the riser cable.
| Model | O11DM-1W-4 |
| Color | White |
| PCIe Riser Cable | Gen 4.0 |
| Bracket Kit Dimension | (D)180mm X (W)191.5mm X (H)272.5mm |
| Material | SPCC 1mm |
| Cable Length | 200mm |
| Expansion Slots | 3 slots |
| Warranty | 1 Year |
| Note | *** Features, Price, Specifications are subject to change without notice. |
| Product Type | |
|---|---|
| color | |
| Brands | |
| Warranty | |
| EAN / UPC Code |
Q & A
Lian Li O11D-Mini (PCI-E 4.0 X16) Vertical GPU Bracket Kit With 200mm Riser Cable For O11Dynamic Mini (White)
Related Products
- Improved daisy chain design to connect 2 clusters of fans.
- SL120 V2 fan frame thickness is 28mm to provide 10% improved airflow compared to V1.
- Removable interlocking keys to provide better radiator clearance.
- Start/stop fan RPM support for a quieter environment.
In stock
- Mesh Panels at the top, front and rear, providing extreme airflow
- Modular backplate (5 + 2 expansion slot), supporting MINI-ITX up to E-ATX MB
- Included 2 x 140MM PWM fans at the front, and a 120mm PWM fan at the rear
- Support 6 x 2.5” SSD or 4 x 3.5” HDD + 2 x 2.5” SSD
- Mid-tower chassis configurable for air cooling and water cooling
- Airflow optimized front, top and PSU shroud side mesh panels
- Equipped with 2 x front 160 PWM fans (ARGB), ARGB lighting and mode could be controlled by M/C buttons from the I/O Panel
- Supports 360 radiator at the top, front and a maximum of 9 x 120mm fans
- GPU Anti-Sag support bracket included
- Extensive cable management solution
- Available as a GPU triple 8 pin
- The design of Strimer Plus V2 is thinner and more flexible than ever, and the braided cables are replaced with high-end silicon-covered cables.
- Control Strimer Plus V2 by the included controller or L-Connect 3.
- each Strimer features individually controllable light channels for even more possible light effects. With the 24-pin at 6 channels, the Dual 8-pin at 4 channels, and the triple 8-pin at 6 channels, multiple, highly customizable light effects can be combined within the same cable via L-Connect 3.
- L-Wireless Sync supported (required for use)
- UNIFAN interlocking system for streamlined cable management
- Available in two versions: LED and LCD (mixable in a single cluster)
- Two light zones for an enhanced visual experience
- Model : O11DE-2X I Colour : White
- Material : 1mm Steel I Dimension : Mounting frame- 71.8 X 128 X 67.58mm, Support Frame : 70 X 81 X 10mm
- PCIE RISER CABLE : Gen 4.0 I ExpANSION SLOT : 3
- CABLE INTERFACE : PCI-E X 16 I CABLE LENGTH : 380mm
- 1 Year Manufacturer Warranty
- Vertical Graphics card holder for LANCOOL II with PCI-E Riser Cable 200mm
- Allows you display graphics cards while still having room for 2x120mm Fans
- Mounted underneath to create an unobstructed air flow
- Included PCI-E Riser Cable 200mm, allows you to mount a PCI-E 16X Card.
- LANCOOL 216 optional accessory
- Magnetic Dust Filter
- Easy to clean
- Software controlled fan speed/ LED lighting
- Only one cable is required for a cluster of fans
- Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
- 40 LEDs in each fan
- Quick PIN connection to provide ease of installation
- Low noise level at high RPM
- Infinity mirror look all around
In stock
• Infinity mirror look all around
• Reversed Blade fan that intakes air while seeing the infinity effect
• Only one cable is required for a cluster of fans
• Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
• 40 LEDs in each fan
• Quick PIN connection to provide ease of installation
• Optimized for mounting at the bottom of the case or on top of the radiator
In stock
- Minimalistic sleek design 26.3L micro form factor chassis
- Side and top panels are designed with steel mesh
- Accommodates M-ATX and ITX motherboard with 4 slots 415mm large GPU
- Supports up to 360 radiator and 10 x 120mm fans
- Supports ATX/SFX/SFX-L and LIAN LI Edge PSU that can be mounted sideways or frontways
- White, Full-Tower, 522 x 304 x 531.9 mm , 4.0mm Tempered Glass Aluminum
- 8 Expansion Slots, Storage : Behind MB Tray: 3 X 2.5ʹʹ SSD Hard Drive Cage: 4 X 3.5ʹʹ HDD or 2.5ʹʹ SSD
- I/O Panel : Power Button , Reset Button , USB 3.0 x 4 , Audio x 1 , USB Type C , Color Button , Mode Button
- Fan Support : Top – 120mm x3 / 140mm x3, Side- 120mm x3 / 140mm x3, Bottom- 120mm x3/ 140mm x3, Rear- 120 mm x1 or 2
- GPU Length Clearance : 460mm(Max) ; CPU Cooler Height Clearance : 167mm(Max)
In stock
Reviews
There are no reviews yet