Lian Li Lancool 216 RGB (E-ATX) Mid Tower Cabinet With Tempered Glass Side Panel (White)
- Mid-tower chassis configurable for air cooling and water cooling
- Airflow optimized front, top and PSU shroud side mesh panels
- Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
- Supports 360 radiator at the top, front and a maximum of 10 fans
Original price was: ₹11,999.00.₹8,359.00Current price is: ₹8,359.00.
AIRFLOW FOCUS
The Lian li LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow.
CONTINUOUS FRONT TO TOP MESH
To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side. The front mesh extends to the top for a continuous mesh panel.
LANCOOL 216 RGB FANS
The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header.
Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.
AIR COOLING MODE / WATER COOLING MODE
The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.
WATER COOLING
Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.
FRONT I/O CAN BE RELOCATED
Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.
HARDWARE COMPATIBILITY
The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.
LATEST GEN. GPU READY
With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.
PRESSURE LEAK FREE
Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.
REMOVEABLE TOP RADIATOR BRACKET
The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance.
PCIE FAN BRACKET
The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.
VERTICAL GPU COMPATIBLE
The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required.
CABLE MANAGEMENT
The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.
DUST FILTER
For users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans.
PCIE CABLE
For vertical GPU mounting, only an additional riser cable is required. With a PCB that has a hole spacing of 112.7mm, the Lian-Li PCIe 4.0 X16 RISER CABLE is compatible with the LANCOOL 216.
| MODEL | LANCOOL 216 |
| DIMENSIONS | (D) 480.9mm x (W) 235mm x (H) 491.7mm |
| COLOR | White |
| MATERIAL | Steel / 4.0mm Tempered Glass |
| MOTHERBOARD SUPPORT | E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX |
| FAN SUPPORT | Top: 3 x 120mm / 2 x 140mm PSU Cover: 2 x 120mm / 2 x 140mm (Air Cooling mode) Front: 3 x 120mm / 2 x 140mm / 2 x 160mm Rear: 1 x 120mm / 1 x 140mm PCIe Fan Bracket: 1 x 120mm |
| RADIATOR SUPPORT | Front: 360 / 280 / 240mm Top: 360 / 280 / 240mm Bottom: 240mm |
| PSU SUPPORT LENGTH | ATX (Under 220mm) |
| GPU LENGTH CLEARANCE | 392mm (max) |
| CPU COOLER HEIGHT CLEARANCE | 180.5mm (max) |
| DRIVE | Drive Cage：2 x 2.5” SSD + 2 x 3.5” HDD PSU Cover：2 x 2.5” SSD Behind MB tray: 2 x 2.5” SSD |
| EXPANSION SLOT | 7 |
| I/O PORTS | 1 x Power Button 1 x Reset Button 2 x USB 3.0 1 x USB Type C 1 x Audio |
| INCLUDED FANS | LANCOOL 216 RGB Front: 2 x 160mm ARGB Fans Rear: 1 x 140mm PWM Fan LANCOOL 216 Front: 2 x 160mm PWM Fans Rear: 1 x 140mm PWM Fan |
| DUST FILTERS | 1 x Bottom |
| Warranty | 1 Year |
| Note | *** Features, Price, Specifications are subject to change without notice. |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Impressive Front Panel: A mix of mesh and slits the front panel is well ventilated and has an X-shaped ARGB strip to complete the package.
- Fully Loaded IO panel: 2 x USB 2.0, 1 x USB 3.0, 1 x Audio In, 1 x Mic and one SD/TF Card Reader
- Optimum cooling: The case comes with one 120mm fan installed at the back and can accommodate a total of six 120mm fans for an optimum cooling experience.
- Liquid cooling: Can house a 120mm at the back of a 120mm or 240mm in the front.
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- The MAG FORGE 111R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- Mid-tower chassis with two modes: Normal Mode/ Reverse Mode
- Feature multi-directional power button and movable IO module
- Front and side tempered glass panels for components and RGB display
- Supports up to 3x 360 radiators and a maximum of 10 fans
- Offers 9 storage drives mounting space
- Dual-chamber layout with hooks friendly cable management compartment
- Five optional accessories: Vertical GPU Kit / Upright GPU Kit / Additional I/O kit / Front Mesh Kit / Top I/O Kit
- Futuristic Front Design: Impressive space ship-inspired conical front panel design to make it stand out from the crowd.
- Ideal for liquid cooling: With support for a 240mm/280mm radiator in the front and a 240mm on top the case is built for liquid cooling.
- Well equipped IO Panel: 1 x USB 3.0, 2 x USB 2.0, 1 x Audio, 1 x Mic and Reset button laid out in a vertical fashion for an edgy look.
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design.
- ARGB Fans pre-installed: Comes with two 120mm ARGB fans out of the box.
- Mid-Tower with support for ATX / micro ATX / Mini-ITX Motherboards featuring a brushed aluminium chassis
- Two hinged swing-doors with premium-quality 4mm thick tempered glass design guarantees window durability and viewing capability
- Personalize Your Gaming Rig with a built in 1 to 8 ARGB LED hub and 4 ARGB fans + 1 system fan
- Custom Liquid Cooling Ready features an extractable radiator bracket which supports for radiators up to 360mm in length
- MSI Mystic Light RGB lighting software features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of Mystic Light Sync enabled product
- Preinstalled Fans : Front: 1 x 200mm ARGB LED Fan included, Top: 2 x 200mm ARGB LED Fan included and Rear: 1 x 120mm ARGB LED Fan included
- MSI MAG VAMPIRIC 010X chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- The MAG FORGE 110R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- Multiple Radiator Mounts – For enthusiast-grade cooling dual 360-millimeter radiators are supported on the top and front panel while a single 240mm is supported on the side to keep the most extreme systems cool.
- Large Storage Options – Dual 2.5” SSD mounts and dual 3.5” HDD mounts the Ant Esports 690 Air is ideal to build any gaming or production system.
- Movable Disk Bracket – The HDD cage under the PSU shroud is movable and can be slid towards the front to make space for long PSUs and increase it to 220mm if needed.
- Spacious Interiors – The spacious interior fits upto an E-ATX motherboard configuration. Support for up to a 390mm graphics card, a 175mm CPU cooler, and up to a 220mm PSU in length provides room for upgrades.
- Four Dust Filters – With magnetic dust filters in the front, side, and top along with a pull tray one on the PSU, the 690 Air facilitates high airflow while filtering out dust particles.
- Unorthodox Looks – Stylish front mesh panel with three ARGB 120mm fans for that mean yet clean look.
- Ample Cooling – Can house eight 120mm fans out of which four come pre-installed.
- Dual Dust filters – The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors – Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Awesome front Panel with RGB strip – The front panel is a combination of a matte finish and mesh bottom along with an intricately placed RGB strip for the perfect look.
- Ample Cooling: Can house eight 120mm fans out of which one rear fan comes pre-installed.
- Dual Dust filters: The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors: Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Well populated IO panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button.
- Stylish RGB Light on Black Tempered Glass Front panel
- With RGB LED Switch and 2 USB 3.0 on I/O Panel
- Full-Size Black Tempered Glass Side Panel
- PSU Shroud Design
- Detachable Dust Filter
- Liquid Cooling Compatible
Reviews
There are no reviews yet