Arctic F12 Cabinet Fan (Single Pack)
- Arctic F12 120mm PWM-controlled fan which regulates fan speed based on load
- 300-1350rpm at 12V providing a maximum airflow of 74 CFM
- Low-noise blades design increases airflow and minimizing fan noise
- Fluid dynamic bearing significantly extends service life
- 6-year limited warranty
₹480.00
Out of stock
Email when stock available
Arctic F12 Cabinet Fan (Single Pack)
Arctic F12 Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Features:
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Two Way installation
Blow warm air out of the case
Draw cool air into your case
| Brands | |
|---|---|
| Fan Size | |
| FAN Speed | |
| Case Fan Pack | |
| EAN / UPC Code |
Q & A
Arctic F12 Cabinet Fan (Single Pack)
Related Products
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 3000 RPM
- Blade geometry A-Series with Flow Acceleration Channels
- Connector & pin- configuration : 4-pin PWM I Rotational speed : 1700 RPM
- Cable length : 40cm I Acoustical noise : 25,1 dB(A)
- Blade geometry : Pressure-optimized Nine Blade Design with Vortex-Control Notches
- Max. input power : 1,08 W I Operating voltage : 12V
- 6 Year Warranty
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Low-Noise Adaptor (L.N.A.)
- NA-AV2 anti-vibration mounts
- Fan Dimension : 120×120×26.5 mm
- FAN Speed : 500~1800 RPM±10% ; Fan Air Flow : 52.5 CFM
- Fan Air Pressure : 2.08 mmAq ; Fan Noise Level: ≤28.8 dB(A)
- Fan Connector : 4-Pin PWM ; FAN Rated Voltage : 12VDC
- FAN Rated Current : 0.18A ; FAN Power Consumption : 2.16W
- Connector & pin-configuration : 4-pin PWM I Rotational speed : 1850RPM
- Cable length : 20cm + 30cm NA-EC1 extension cable I Low-Noise Adaptor
- Frame technology : AAO (Advanced Acoustic Optimisation)I Blade geometry : A-Series with Flow Acceleration Channels
- Max. input power : 1,56 W I Operating voltage : 12 V
- 6 Year Warranty
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
- Fluid Dynamic bearing
- Built in 10 RGB effects with three button controller
- Compatible with motherboard 5V addressable header
- Fan Speed: 900~1800 RPM
- Max. Air Flow: 57.97 CFM
- Rifle Bearing reduced noise spin and great performance
- Efficient 45.3 CFM Air Flow Performance
- 23dBA Fan Operation
- VENTO 120 ARGB Lighting Effects
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Material Fibre-glass reinforced polyamide
- Blade geometry Heptaperf
- Improved daisy chain design to connect 2 clusters of fans.
- SL120 V2 fan frame thickness is 28mm to provide 10% improved airflow compared to V1.
- Removable interlocking keys to provide better radiator clearance.
- Start/stop fan RPM support for a quieter environment.
In stock
- Ring + blade A-RGB LED lighting.
- Wire controller included.
- Support A-RGB motherboard synchronization.
- Balanced cooling performance and noise level
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
Reviews
There are no reviews yet