Adata XPG Lancer 32GB (32GBx1) DDR5 6000MHz Desktop RAM (Black)
- New speed benchmark in gaming memory
- Beautifully crafted heat sink
- PMIC and ECC for Reliability
- Fast clock speeds up to 6000MT/s
- Supports Intel® XMP 3.0 and AMD EXPO for
- easy overclocking
- RoHS compliant
Original price was: ₹14,999.00.₹8,699.00Current price is: ₹8,699.00.
Adata XPG Lancer 32GB (32GBx1) DDR5 6000MHz Desktop RAM (Black)
A New Speed Benchmark in Gaming Memory
The XPG LANCER ushers in the DDR5 era for gaming memory. Reaching frequencies of up to 6400 MT/s, It will give you a major performance boost for gaming and overclocking.
Enhanced Power Management
The XPG LANCER DDR5 features a built-in Power Management IC (PMIC) that enhance power supply stability. It’s lower operating voltage also make LANCER more power-efficient than DDR4.
Stability and Reliability
With On-die error correcting code (ECC) this module can correct errors in real-time to provide increased stability and reliability.
Made with High-Quality Materials
High-quality ICs and PCBs ensure uncompromised performance and reliable overclocking, ideal for discerning gamers and overclockers.
AMD EXPO
Support for AMD EXPO (EXtended Profiles for Overclocking) and compatibility with the latest platforms for reliability and stability.
* AMD EXPO only supported by DDR5 memory with a speed of 6400MT/s or less.
Overclocking Made Easy
With support for Intel XMP 3.0, get overclocking easily without the need to hassle with BIOS settings. There is no need to repeatedly adjust and fine-tune overclocking parameters.
QuikTips: DDR5 vs DDR4 – Appearance
DDR5 U-DIMM modules have the same dimensions and pin count as DDR4 modules. The most obvious difference is the position of the fool-proof notch. Also, DDR5 integrates I/O resistors with CMD/ADD resistors. Also, the appearance of DDR5 modules are cleaner than DDR4. In addition, you can see a PMIC in the center.
QuikTips: DDR5 vs DDR4 – Performance
The biggest change is that bandwidth and frequency are significantly higher. The ADATA DDR5 memory modules deliver frequencies of up to 4800MT/s and feature bandwidth of 38.4GB/s, which is 50% higher than the DDR4-3200. The maximum frequency is increased 1.63 times compared to DDR4.
QuikTips: DDR5 vs DDR4 – Chip Architecture
DDR5 modules provide two times more capacity than DDR4 by packing in more banks and bank groups. In addition, Burst Length and Prefetch are also doubled. And to ensure data integrity, they feature error correcting code (ECC) technology.
QuikTips: DDR5 vs DDR4 – Comparison Table
This specification comparison table shows the advantages of DDR5.
| P/N | AX5U6000C3032G-CLABK |
| Memory Type | DDR5 |
| Form Factor | U-DIMM |
| Color | Black |
| Capacity | 32GB |
| Speeds | 6000 |
| CAS Latencies | 30 |
| Operating Voltage | 1.25V |
| Operating Temperature | 0°C to 85°C |
| Dimensions (L x W x H) | 133.35 x 40 x 8mm |
| Weight | 72.4g |
| Warranty | Limited lifetime |
| Note | *** Features, Price, Specifications are subject to change without notice. |
| Weight | 1 kg |
|---|---|
| Brands | |
| color | |
| Memory Kit | |
| RAM Frequency | |
| RAM Size | |
| RAM Type | |
| Warranty | |
| EAN / UPC Code |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- CL 16 Low-Latency
- Outshine the Competition
- More RGB per mm2
- Diamond-Cut Design
- Stable, Durable and Reliable
- Overclocking with Intel® XMP 2.0
- Programmable RGB Lighting
- Ready for AMD- and Intel-based systems
- Corsair Vengeance Lpx XMP 2.0 SUPPORT: One setting is all it takes to automatically adjust to the fastest safe speed for your VENGEANCE LPX. Tested Voltage 1.35V
- ALUMINUM HEAT SPREADER: The unique design of the VENGEANCE LPX heat spreader optimally pulls heat away from the ICs and into your system’s cooling path, so you can push it harder.
- DESIGNED FOR HIGH-PERFORMANCE OVERCLOCKING: Each VENGEANCE LPX module is built from an custom performance PCB and highly-screened memory ICs.
- LOW-PROFILE DESIGN: The small form factor makes it ideal for smaller cases or any system where internal space is at a premium. SPD Latency 15-15-15-36
Model – G.Skill Ripjaws Laptop Memory
Speed – 3200 MHz
Ram Type – DDR4
Ram Size – 8GB x 1
Tested latency –22-22-22-52
Note – Price, Specifications and Features May Change Without Notice
- Mesmerizing RGB lighting -supports software from major motherboard makers, fully customizable and programmable
- More RGB per mm2 -That equates to over 60% of the module’s surface area.
- Supports the new Intel X299 platform and implements baseline 3000MHz (via SPD settings)
- Fast clock speed 3200MHz
- Intel XMP 2.0 -more accessible overclocking
- RoHS compliant
- Mesmerizing RGB lighting -supports software from major motherboard makers, fully customizable and programmable
- More RGB per mm2 -That equates to over 60% of the module’s surface area.
- Supports the new Intel X299 platform and implements baseline 3000MHz (via SPD settings)
- Fast clock speed 3200MHz
- Intel XMP 2.0 -more accessible overclocking
- RoHS compliant
- Corsair VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.
- VENGEANCEvLPX isv optimized and tested for the latest AMD and Intel DDR4 motherboards and offers higher frequencies, greater bandwidth, and lower power consumption. XMP 2.0 support for trouble-free automatic overclocking. Fan Included: No
- The VENGEANCE LPX module height is carefully designed to fit smaller spaces. Compatibility – Intel 100 Series,Intel 200 Series,Intel 300 Series,Intel 400 Series,Intel 500 Series,Intel X299.
- Available in multiple colors to match your motherboard, your components, or just your style.
- The heatspreader is made of pure aluminum for faster heat dissipation, and the custom performance PCB helps manage heat and provides superior overclocking headroom.
- Greater performance starting at 4800MT/s
- Improved stability for overclocking
- Increased efficiency
- Intel® XMP 3.0-Ready and Certified
- Qualified by the world’s leading motherboard manufacturers1
- Plug N Play at 4800MT/s
- Corsair VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.
- VENGEANCEvLPX isv optimized and tested for the latest AMD and Intel DDR4 motherboards and offers higher frequencies, greater bandwidth, and lower power consumption. XMP 2.0 support for trouble-free automatic overclocking. Fan Included: No
- The VENGEANCE LPX module height is carefully designed to fit smaller spaces. Compatibility – Intel 100 Series,Intel 200 Series,Intel 300 Series,Intel 400 Series,Intel 500 Series,Intel X299.
- Available in multiple colors to match your motherboard, your components, or just your style.
- The heatspreader is made of pure aluminum for faster heat dissipation, and the custom performance PCB helps manage heat and provides superior overclocking headroom.
- Corsair VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.
- VENGEANCEvLPX isv optimized and tested for the latest AMD and Intel DDR4 motherboards and offers higher frequencies, greater bandwidth, and lower power consumption. XMP 2.0 support for trouble-free automatic overclocking. Fan Included: No
- The VENGEANCE LPX module height is carefully designed to fit smaller spaces. Compatibility – Intel 100 Series,Intel 200 Series,Intel 300 Series,Intel 400 Series,Intel 500 Series,Intel X299.
- Corsair Vengeance Available in multiple colors to match your motherboard, your components, or just your style.
- Corsair Vengeance heatspreader is made of pure aluminum for faster heat dissipation, and the custom performance PCB helps manage heat and provides superior overclocking headroom.
- Certified by TUF Gaming Alliance
- 120° ultra-wide-angle lighting effects
- Asymmetrical, minimalist design
- Aluminum alloy cooling module with high heat transfer efficiency
- Supports Intel & AMD motherboards
Model – G.Skill Ripjaws V Black
Speed – 3200 MHz
Ram Type – DDR4
Ram Size – 8GB x 1
Tested latency –18-22-22-42
Note – Price, Specifications and Features May Change Without Notice
- Using strictly selected new Hynix A-die 2GB chips.
- 10-layer PCB construction for enhanced overclocking performance and stability
- High-performance brushed aluminum heat spreader for optimal heat dissipation
- Real-time temperature, frequency and performance monitoring.
- 5V Motherboard RGB sync ready
- Intel XMP 2.0 ready
- Limited lifetime warranty
Reviews
There are no reviews yet