Lian Li UNI Fan SL Infinity 120 Reverse Blade White
• Infinity mirror look all around
• Reversed Blade fan that intakes air while seeing the infinity effect
• Only one cable is required for a cluster of fans
• Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
• 40 LEDs in each fan
• Quick PIN connection to provide ease of installation
• Optimized for mounting at the bottom of the case or on top of the radiator
Original price was: ₹5,999.00.₹3,399.00Current price is: ₹3,399.00.
Out of stock
Email when stock available
Infinity Mirror ARGB Fan
Introducing a new look to PC fans and a new level of installation simplicity and light effect customizability.
INFINITY MIRROR FAN
A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.
CENTERED INFINITY MIRROR ARGB
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
SIDE FRAME ARGB
Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.
ALUMINUM TRIM SURROUNDED INFINITY MIRROR
Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.
REAR RIM OF LED AROUND THE ALUMINUM LOGO
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
UNPRECEDENTED MODULARITY
The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.
DAISY CHAIN FAN
A pin-to-pad contact point passes the signal and power through the fan cluster.
REMOVABLE KEYLOCK
The interlocking key on each fan is now removable to improve compatibility with radiators fittings.
REVERSIBLE CABLE MODULE
The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.
UNCOMPROMISED PERFORMANCE
The UNI FAN SL-INF Reverse blade operates with a slightly higher noise level with a better airflow (63.6 CFM Max) comparing to the original UNI FAN SL-INF.
LOWER WIND NOISE
When installed as intake fan with the reverse blade, the wind noise is lower than the regular blade.
Note: More obvious when installed on a radiator
THE SAME CONTROLLER AS SL-INF
16 FANS IN ONE GO FOR EACH GROUP OF FANS
The included controller is in the SLIN120 Triple Pack,supporting up to 16 fans (4 fans in each group) and 2 SM-type connecting devices.
L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANS
Control and preview with precision the lighting effect of the SL-Infinity fans with the new L-Connect interface.
Note: Only available when connecting via a UNI FAN SL-INFINITY controller, controller is sold separately or included in triple pack regular fan.
ENDLESS LIGHTING EFFECTS
Similar to the AL fans, L-Connect 3 can set the lighting effects of the SL-Infinity fans for both the fan blades and the fan frame inner edges separately, or go with pre-set combined lighting effects.
Option 1. Set the fan blade and inner fan frame lighting modes individually to achieve a custom look.
Fan Blade & Center Infinity Mirror LED
Angle Fan Frame & Side Infinity Mirror LED
Fan Blade & Center Infinity Mirror + Angle Fan Frame & Side Infinity Mirror LED
| PRODUCT NAME | UNI FAN SL-INF REVERSE BLADE | |
|---|---|---|
| MODEL | UF-RSLIN120-1W White | |
| COLOR | White | |
| NUMBER OF FANS | 1 | |
| CONTROLLER | No | |
| MATERIAL | PBT/PC/Aluminum | |
| FAN DIMENSION | 120 X 122 X 25 ( mm ) | |
| RATED VOLTAGE | DC 12V (FAN) & 5V (LED) | |
| FAN SPEED | 0, 200-2100 RPM | |
| AIR PRESSURE | 2.02 mmH2O (Maximum) | |
| AIRFLOW | 63.6 CFM (Maximum) | |
| ACOUSTIC NOISE | 32 dB(A) | |
| LOCKED CURRENT | ≧50mA | |
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |
| OPERATION VOLTAGE | DC 12V & 5V | |
| START-UP VOLTAGE | ≦6V | |
| INPUT CURRENT | 180mA (FAN) /600mA (LED) | |
| IINPUT POWER | 5.16W | |
| WARRANTY | 2 years | |
| Weight | 1 kg |
|---|---|
| Brands | |
| Case Fan Pack | |
| color | |
| Connector | |
| Fan Size | |
| FAN Speed | |
| Lighting Profile | |
| Product Type | |
| Warranty | |
| EAN / UPC Code |
Q & A
Lian Li UNI Fan SL Infinity 120 Reverse Blade White
Related Products
- Dazzling preset lighting effect (purple/blue/orange) from 6 high-brightness, long-lasting LEDs.
- Optimized 9 fan blades design, balancing air flow and wind pressure.
- PWM smart adjustment technology, effectively reducing wind noise.
- 4-pin power connector for high-performance and stability.
- Quiet, Powerful: Cool your PC with high airflow aRGB fans packed with LEDs and lighting effects powered by Razer Chroma RGB
- Connect Up to 8 Fans: Daisy chain and connect up to 8 Razer Kunai fans to Pulse Width Modulation and aRGB controllers to create immersive lighting effects – supported by Razer Synapse software for ultimate customization
- PWM Fan Controller Support: Whether you need maximum airflow to cool your PC or run quietly at lower RPMs, our Pulse Width Modulation fan controller allows you to conveniently adjust fan speed based on your needs (PWM fan sold separately)
- Powered by Razer Chroma RGB: Unlock ultimate aRGB customization with 16.8 million colors, light patterns, and effects which react to your gameplay – get the world’s largest lighting ecosystem and control it from one platform
- Less turbulence thanks to aerodynamic stator struts
- Supports ASUS AURA, Gigabytes Fusion MSI Mystic Light and others
- Trip Wire provides a micro-turbulent layer for enhanced blade efficiency
- Supports chaining to simplify cable management
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
- Size : 120x120x25 mm
- Connector & pin configuration 4-pin PWM
- Low-Noise Adapter (L.N.A.)
- 4 Vibration-Compensators
In stock
- VIBRANT RGB LIGHTING: 20 LEDs across the inner and outer rings showcase custom lighting from any angle.
- BALANCED PERFORMANCE: Fan blade design balances airflow and static pressure for use in both intake or exhaust locations.
- SILENT AND DURABLE: The fluid dynamic bearing ensures the fan operates quietly and efficiently, providing long-lasting performance.
- PWM CONTROL: Fan speeds adjust according to your system’s demands. It cools quickly when necessary, but stays quiet at low loads to maximize efficiency.
- CUSTOMIZE WITH CAM: Personalize RGB lighting effects, control fan speeds, and sync with other NZXT products.
- 120mm PWM FAN
- BLUE LIGHTING
- CORSAIR MAGNETIC LEVITATION BEARING
- UP TO 2000 RPM FAN SPEED
- UP TO 30.4 DBA NOISE LEVEL
- UP TO 58.10 CFM AIRFLOW
- Trusted Premium Brand : 5-years manufacturer’s warranty and Professional Customer Service Assistance.
- Antec P12 120mm Case Fan : 1st Generation of Antec P12 Case Fan provides the best performance requirement for cooling and low noise.
- Highly Efficient Ventilation : The square design of the fan frame providing highly efficient ventilation (1000 RPM with 37.5 CFM)
- Superior Airflow and Pressure : Designed the square frame enhance the superior airflow (37.5 CFM) and pressure (0.71 mmH2O)
- Ultra-Long Lifespan : High-quality sleeve bearing is as quiet as the Fluid Dynamic Bearing and delivers an ultra-long lifespan for years of maintenance-free usage.
Octagonal ARGB Lights
Unique and unorthodox octagonal ARGB diffusers on both sides for distinctive looks and even looks.
Hydraulic Bearing Gear Motor
Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Long Life Span
Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
Shock-Absorbing Pads
Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
- Air volume: 57 CFM
- Maximum speed: 2000+-10% rpm
- Avg. Noise: <=27db
- Rated current: 0.23A
- Hydraulic Ball Bearing
- 3 Pin 5V Addressable RGB
- 120mm PWM FAN
- RED LIGHTING
- CORSAIR MAGNETIC LEVITATION BEARING
- UP TO 2000 RPM FAN SPEED
- UP TO 30.4 DBA NOISE LEVEL
- UP TO 58.10 CFM AIRFLOW
Reviews
There are no reviews yet