Lian Li O11DE-6W Upright GPU Bracket White
- Upright graphics card bracket for O11D EVO
- New mounting angle for GPU opens room for unrestricted chimney-style configuration.
Original price was: ₹1,099.00.₹699.00Current price is: ₹699.00.
lian li O11D EVO Upright GPU Kit
Show off your graphics card in a unique way with the exclusive upright GPU bracket, including a PCIe 4.0 riser cable for seamless connectivity.
TWO MOUNTING WAYS WORK ON BOTH MODES
Both HDD tray panel and fan bracket support to mount upright GPU kit on normal or reverse mode.
HDD Tray Panel Scenario
Fan Bracket Scenario (120mm Fan x3)
The GPU holds perfectly beside the motherboard and holds 2 HDDs or 4 SSDs behind the GPU.
HDD TRAY PANEL SCENARIO
Supreme Water-Cooling Configuration
Normal Mode with HDD Tray Panel Scenario
Moving the GPU next to the motherboard opens up the main chamber in the chassis for the tubes to pass through and creates a chimney-style airflow, effectively cooling the top and bottom radiator.
Ultimate Air-Cooling Configuration
SUPPORT WIDE VARIETY SIZES GPU
While the bracket supports up to 3 slots thick GPUs, thin GPUs can be mounted at the second slot.
In addition, the L-type support bracket can be adjusted according to the GPU’s width and thickness.
GPU installing at ① slot –
- GPU Max Width: 150mm
- Water block GPU max Width: 151mm
- Compatible with Compatible with 600mm PCIe 4.0 Riser Cable(PW-PCI-4-60X/W)
GPU installing at ② slot –
- GPU Max Width : 150mm
- Water block GPU max Width : 158mm
- NOT compatible with 600mm PCIe 4.0 Riser Cable, please purchase PCI-e 4.0 X16 Riser cable(PW-PCI-420) and connect to the riser cable included in Upright GPU Kit (O11DE-2X/W) to route from the second chamber.
Note:
Plug the display cable to the graphic card before installing the upright GPU on the chassis..
O11D EVO UPRIGHT GPU KIT SIZE LIMITATION FOR GPU SUPPORT
1.
length ≤ 356mm
2.
Width ≤ 150mm
Supports without using NVIDIA adaptor, slimmer power cable required
3.
Thickness > 62
-
- Does NOT support the L-type bracket, be careful when moving the case
- Top 360 AIO total max thickness: 56mm
- Bottom fan can NOT be installed
GEN 4.0 PCIE RISER CABLE
The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performances.
Note:
Make sure the GPU PCIe Connector is fully inserted into the PCIe Riser Cable Socket and motherboard PCIe slot when powered off. Circuit short may occur and cause hardware damages if installed not properly.
FAN AND RADIATOR COMPATIBILITY
When installing a three-slot thick GPU in the upright position, the radiator width clearance beside the bracket is limited to 130mm, and 120mm for fans.
Normal Mode
Reverse Mode
| PRODUCT NAME | Upright GPU Bracket for O11D EVO |
| MODEL | G89-O11DE-6W-IN |
| COLOR | White |
| BRACKET DIMENSION | Mounting frame: 71.8mm(L) x 128mm(D) x 67.58 mm(H) Support frame: 70mm(L) x 81mm(D) x 10 mm(H) |
| MATERIAL | 1mm STEEL |
| EXPANSION SLOT | 3 slots |
| GPU Compatibility | Length: Maximum 356MM Thickness: Maximum 62MM thick (with the big L-type support bracket) Width HDD Tray Panel Scenario: 100MM ~ 150MM Fan Bracket Scenario: 121MM~150MM Water block GPU: Maximum 158MM |
| Warranty | 1 Year |
| Note | *** Features, Price, Specifications are subject to change without notice. |
| Brands | |
|---|---|
| color | |
| Product Type | |
| Warranty | |
| EAN / UPC Code |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Vertical Graphics card holder for LANCOOL II with PCI-E Riser Cable 200mm
- Allows you display graphics cards while still having room for 2x120mm Fans
- Mounted underneath to create an unobstructed air flow
- Included PCI-E Riser Cable 200mm, allows you to mount a PCI-E 16X Card.
- Available as a GPU triple 8 pin
- The design of Strimer Plus V2 is thinner and more flexible than ever, and the braided cables are replaced with high-end silicon-covered cables.
- Control Strimer Plus V2 by the included controller or L-Connect 3.
- each Strimer features individually controllable light channels for even more possible light effects. With the 24-pin at 6 channels, the Dual 8-pin at 4 channels, and the triple 8-pin at 6 channels, multiple, highly customizable light effects can be combined within the same cable via L-Connect 3.
- Removable Magnetic Aluminium Cap
- Customizable Addressable Rgb Lighting
- Machine Detailed Aluminium Housing
- Rotatable Block Housing
- Aluminium Shields On Both Sides
- Black, Mid- Tower, (D) 526 x (W) 238 x (H) 523 mm, Aluminum 4.0mm tempered glass (both sides)
- Behind MB Tray: 2 X 2.5ʹʹ SSD , Hard Drive Cage: 4 X 3.5ʹʹ HDD/2.5ʹʹ SSD , Behind the Right-side Shroud Panel: 3 X 2.5ʹʹ SSD Above , PSU Chamber:3 X 2.5ʹʹ SSD
- Power Button, Reset Button, C Mode, M mode, USB 3.0 * 2, Audio *1
- Pre-Installed Fans : 3 x 140mm Front Fans and 1 x 140 mm PWM Rear Fan ; Fan Support : Front (multi-way bracket): 3 X 120mm or 3 X 140mm, Above PSU Chamber: 3 X 120mm or 2 X 140mm Top: 3 X 120mm or 3 X 140mm Rear: 1 X 120mm or 1 X 140mm ; Radiator Support : Front / Top / Bottom : 360mm
- GPU Length Clearance : 420mm(Max) ; CPU Cooler Height Clearance : 185mm(Max) ; Dust Filter : 1 x Bottom
- Premium look
- Unprecedented modularity
- Hinged flip panels all around
- Optimized cooling support
- Cable management with ease
- Optimized storage configuration
- Adds LED side strips to LIAN LI performance fans – UNI Fan P28 & GA ll Trinity Performance 360 AIO fans.
- Daisy-chain design
- Compatible with L-Connect 3 (via UNI HUB) or motherboard sync.
- FAN DIMENSION : 120mm x 120mm x 25mm
- RATED VOLTAGE : DC 12V (LED Voltage 5V)
- FAN SPEED : 800±200 (30%DUTY) ~ 1900 RPM±10%
- BEARING TYPE : Fluid Dynamic Bearing (FDB)
- Warranty – 2 Year
- Model : O11DE-2X I Colour : White
- Material : 1mm Steel I Dimension : Mounting frame- 71.8 X 128 X 67.58mm, Support Frame : 70 X 81 X 10mm
- PCIE RISER CABLE : Gen 4.0 I ExpANSION SLOT : 3
- CABLE INTERFACE : PCI-E X 16 I CABLE LENGTH : 380mm
- 1 Year Manufacturer Warranty
- Adds LED side strips to LIAN LI performance fans – UNI Fan P28 & GA ll Trinity Performance 360 AIO fans.
- Daisy-chain design
- Compatible with L-Connect 3 (via UNI HUB) or motherboard sync.
- Black, Mid- Tower, (D) 526 x (W) 238 x (H) 523 mm, Aluminum 4.0mm tempered glass (both sides)
- Behind MB Tray: 2 X 2.5ʹʹ SSD , Hard Drive Cage: 4 X 3.5ʹʹ HDD/2.5ʹʹ SSD , Behind the Right-side Shroud Panel: 3 X 2.5ʹʹ SSD Above , PSU Chamber:3 X 2.5ʹʹ SSD
- Power Button, Reset Button, C Mode, M mode, USB 3.0 * 2, Audio *1
- Pre-Installed Fans : 3 x 140mm ARGB Front Fans and 1 x 140 mm PWM Rear Fan ; Fan Support : Front (multi-way bracket): 3 X 120mm or 3 X 140mm, Above PSU Chamber: 3 X 120mm or 2 X 140mm Top: 3 X 120mm or 3 X 140mm Rear: 1 X 120mm or 1 X 140mm ; Radiator Support : Front / Top / Bottom : 360mm
- GPU Length Clearance : 420mm(Max) ; CPU Cooler Height Clearance : 185mm(Max) ; Dust Filter : 1 x Bottom
- Upright graphics card accessories for O11D EVO
- New mounting angle for GPU opens room for unrestricted chimney-style configuration.
- GPU COMPATIBILITY – Length: Maximum 355MM / Thickness: Maximum 62MM thick /
- Premium look
- Unprecedented modularity
- Hinged flip panels all around
- Optimized cooling support
- Cable management with ease
- Optimized storage configuration
Reviews
There are no reviews yet