Arctic P12 Slim PWM PST Cabinet Fan (Single Pack)
- Arctic P12 120mm PWM-controlled fan which regulates fan speed based on load
- 300-2100rpm at 12V providing a maximum airflow of 56.3 CFM
- Low-noise blades design increases airflow and minimizing fan noise
- Fluid dynamic bearing significantly extends service life
- 6-year limited warranty
Original price was: ₹1,999.00.₹798.00Current price is: ₹798.00.
Arctic P12 Slim PWM PST Cabinet Fan (Single Pack)
Features:
Arctic P12 Ideal where space is limited
Unlike normal case fans, which are 25 mm thick, the P12 Slim PWM PST has an installation depth of only 15 mm. This makes it a predestined fan for small form factor builds.
OPTIMISED FOR STATIC PRESSURE
During the development of the new P12 Slim PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Slim PWM PST is particularly suitable for use on covered case vents or inlets with filters.
MORE EFFICIENT TECHNOLOGY
The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 Slim PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.
MAXIMUM QUIETNESS, MINIMUM VIBRATION
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
EXTENDED LIFE SPAN
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
300 TO 2100 RPM REGULATED VIA PWM PST
With a wide range of regulation and the PWM Sharing Technology (PST), the P12 Slim PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
TWO WAY INSTALLATION
Push warm air out of the case
Pull cool air into your case
| Weight | 1 kg |
|---|---|
| Brands | |
| Fan Size | |
| FAN Speed | |
| Case Fan Pack | |
| EAN / UPC Code |
Q & A
Arctic P12 Slim PWM PST Cabinet Fan (Single Pack)
Related Products
- 16. 8 MILLION COLORS] – Featuring 4 LED rings with 54 addressable RGB LEDs for great light coverage, uniform color, and brightness
- [NEONMAKER] – Take full control and personalize Riing Quad LEDs with a color theme or orchestrate up to 40 seconds of custom animations
- [TT RGB PLUS Software/App] – Control fan speed and lights easily with a click, tap, or voice command via the patented TT RGB PLUS Software and TT AI voice control
- [WORKS WITH ALEXA] – Pair with an Alexa-enabled device (not included) and control lights, fan speeds, and even check the current weather condition by giving verbal commends via TT RGB Plus software/app
In stock
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
- Connector & pin- configuration : 4-pin PWM I Rotational speed : 1700 RPM
- Cable length : 40cm I Acoustical noise : 25,1 dB(A)
- Blade geometry : Pressure-optimized Nine Blade Design with Vortex-Control Notches
- Max. input power : 1,08 W I Operating voltage : 12V
- 6 Year Warranty
- The NeonMaker is a new and innovative approach to adjusting the RGB lighting on the Riing Quad fans, allowing users to customize lighting profiles and orchestrate their own light shows.
- Thermaltake Riing Quad 14 Create fascinating lighting effects with our NeonMaker Light Editing Software
- The hydraulic bearing self-lubricates with a high-quality, friction-reducing substance, which lowers operation noise while improving thermal efficiency.
- Riing Quad’s PWM controlled fan is designed with 9 blades and is engineered to generate higher airflow without compromising on ultra-silent operation.
- Thermaltake Riing Quad 14 The In-mold injection anti-vibration rubber pads allow the fan to spin at higher levels without compromising noise levels.
- Deepcool RF120 FS Dazzling preset lighting effect (purple/blue/orange) from 6 high-brightness, long-lasting LEDs.
- Optimized 9 fan blades design, balancing air flow and wind pressure.
- PWM smart adjustment technology, effectively reducing wind noise.
- 4-pin power connector for high-performance and stability.
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 3000 RPM
- Blade geometry A-Series with Flow Acceleration Channels
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 1500 RPM
- Blade geometry A-Series with Flow Acceleration Channels
- Rifle Bearing reduced noise spin and great performance
- Efficient 45.3 CFM Air Flow Performance
- 23dBA Fan Operation
- VENTO 120 ARGB Lighting Effects
Octagonal ARGB Lights
Unique and unorthodox octagonal ARGB diffusers on both sides for distinctive looks and even looks.
Hydraulic Bearing Gear Motor
Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Long Life Span
Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
Shock-Absorbing Pads
Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
- Connector & pin-configuration : 4-pin PWM I Rotational speed : 1850RPM
- Cable length : 20cm + 30cm NA-EC1 extension cable I Low-Noise Adaptor
- Frame technology : AAO (Advanced Acoustic Optimisation)I Blade geometry : A-Series with Flow Acceleration Channels
- Max. input power : 1,56 W I Operating voltage : 12 V
- 6 Year Warranty
- LED ARGB
- Size 120 mm
- Pack Three
- Fan Controller Yes
Reviews
There are no reviews yet