Audio-Technica BP4025 Stereo Condenser Microphone

6 sold in last 5 hours
Hurry! Over 9 people have this in their carts
  •  Delivery & Return

    🚚 Shipping and Risk:

    • Order Will Be Shipped Within 24-48 Working Hours After the Order is Processed.
    • Shipping Partners : Delhivery, XpressBees, Gati, BlueDart, Ecom Express (Depending on Availability at Your Pincode), Computech DOES NOT Have any Control over Operations of Shipping Partners.
    • Delivery dates are estimates Provided By Shipping Partners. Shipping Partners are solely responsible for any kind of Delays.
    • Loss or damage occured during shipping is Computech Responsibility.
    • You Must Leave a Remark During Delivery to Delivery Guy About Damaged Box or Package, and Make an Un-cut Unboxing Video of the Package.
    • You must notify Computech of damaged or missing items from your order within 24-hours of receiving your package

    ♻️ Replacement and Refund Policy:

    • We accept replacement if product is defective or wrong product shipped no return or refund will be entertained.
    •  For gaming chairs only part replacement is applicable if the product delivered is defective or damaged, no refunds will be there for orders of gaming chairs.
    • If the seal of the product is opened and the product is not faulty then return/refund will not be applicable.
    • Packaging material should be kept by the buyer until the replacement window is opened as this will help them to pack the product to its original form to avoid any damage during the transit.
    • Product should be packed in a proper way as it was received by the buyer, do not apply tapes or glues directly on the product or on the product box, this may lead to cancellation of your replacement request.
    • All the accessories which were delivered along with the product should be returned in the same way and along with the product.
    • If the payment was made through our payment gateway, then it will be refunded in same account by which the payment was done, in case of BANK TRANSFER and COD orders refunds will be done only in buyers bank account. Refunds usually takes 7-10 working days to reflect in your account.
  Estimated Delivery: May 24 – May 28
  ... people are viewing this right now

  Share
Guaranteed Safe Checkout

52,499.00

+

Audio-Technica BP4025 Stereo Condenser Microphone

Audio-Technica BP4025 Designed for broadcast and professional recording, Audio-Technica’s BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant – free from all substancesspecified in the EU directive on the reduction of hazardous substances (RoHS).

Features:

  • Large-diaphragm capsules offer pristine sound quality and exceptionally low noise
  • Innovative coincident capsule configuration produces accurate stereo image in smaller housing
  • Compact, lightweight design is ideal for camera-mount use
  • Excellent channel separation
  • Phantom power operation—for use with professional equipment
  • Switchable low-frequency roll-off and 10 dB pad
  • Includes one balanced cable (two 3-pin XLRM-type connectors at output)
  • RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Specifications:

  • Audio-Technica BP4025 ELEMENT: Fixed-charge back plate permanently polarized condenser
  • POLAR PATTERN: X/Y Stereo
  • FREQUENCY RESPONSE: 20-17,000 Hz
  • LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
  • OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa
  • CHANNEL BALANCE: <2.5 dB
  • IMPEDANCE: 170 ohms
  • MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • DYNAMIC RANGE (typical): 131 dB, 1 kHz at Max SPL
  • SIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 Pa
  • PHANTOM POWER REQUIREMENTS: 11-52V DC, 7 mA typical (both channels total)
  • SWITCH: Flat, roll-off; 10 dB pad (nominal)
  • WEIGHT: 269 g (9.5 oz)
  • DIMENSIONS: 186.0 mm (7.32″) long, 47.6 mm (1.87″) head diameter, 21.0 mm (0.83″) body diameter
  • OUTPUT CONNECTOR: Integral 5-pin XLRM-type
  • CABLE: 5.0 m (16.5′) long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
  • ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8″-27 threaded stands; windscreen; soft protective pouch
  • AUDIO-TECHNICA CASE STYLE: S12
Element Fixed-charge back plate permanently polarized condenser
Polar Pattern X/Y Stereo
Frequency Response 20 - 17,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -32 dB (25.1 mV) re 1V at 1 Pa
Channel Balance < 2.5 dB
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range 131 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 80 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 7 mA typical (both channels total)
Switches Flat, roll-off; 10 dB pad (nominal)
Weight 269 g (9.5 oz)
Cable 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
Dimensions 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter
Output Connector Integral 5-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch

Reviews

There are no reviews yet

Add a review
Audio-Technica BP4025 Stereo Condenser Microphone Audio-Technica BP4025 Stereo Condenser Microphone
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Close
Categories
Close My Cart
Close Wishlist
Close Recently Viewed
Close
Close
Categories