LIAN LI O11DE-2W Upright GPU Bracket Kit for O11 Dynamic Evo Cabinet White
₹6,899.00
LIAN LI O11DE-2W Upright GPU Bracket Kit for O11 Dynamic Evo Cabinet White
O11D EVO Upright GPU kit
Show off your graphics card in a unique way with the exclusive upright GPU bracket, including a PCIe 4.0 riser cable for seamless connectivity.
Available in 2 colours
Optimised for direct cooling
Supreme water-cooling configuration
Normal mode
Moving the GPU next to the motherboard opens up the main chamber in the chassis for the tubes to pass through and creates a chimney-style airflow, effectively cooling the top and bottom radiator.
Ultimate air-cooling configuration
Normal mode
Paired with the right GPU kit, the front mesh kit (sold separately) provides the O11D EVO with additional fresh air intake from the front to better cool the GPU and the CPU.
Support wide variety sized GPUs
While the breacket supports up to 3 slots thick GPUs, thin GPUs can be mounted at the second slow. In addition, the L-type support bracket can be adjusted according to the GPUs width and thickness.
Note: 1. Must switch the side fan bracket to the drive tray.
2. Plug the display cable to the graphics card before installing the upright GPU on the chassis.
Gen 4.0 PCIe riser cable
The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed ,offering great performances.
Note: Make sure the GPU PCIe connector is fully inserted into the PCIe riser cable socket and motherboard PCIe slot when powered off. Circuit short may occur and cause the hardware damages if not installed properly.
Fan and radiator compatibility
When installing a three-slot thick GPU in the upright position, the radiator width clearance beside the bracket is limited to 130mm, and 120mm fans.
| Product Name | Upright GPU Kit for O11D EVO |
| Model | O11DE-2W |
| Colour | White |
| Bracket Dimension (L x D x H) | Mounting Frame: 71.8 x 128 x 67.58 mm Support Frame: 70 x 81 x 10 mm |
| Material | 1mm Steel/1.2mm Steel |
| Cable Length | 380mm |
| Cable Interface | PCIe x16 |
| Expansion Slot | 3 Slots |
| Warranty | 1 Year |
| Product Type | |
|---|---|
| Brands | |
| EAN / UPC Code |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Replace the back panel of O11D MINI with the Vertical GPU Bracket Kit to display the front design of the graphics card. Simply remove the modular back panel of O11D MINI and mount the bracket on.
- The vertical GPU bracket kit back panel can be adjusted up and down, providing more clearance for the fans and radiator installed at the bottom of the case. This sets the motherboard location in an O11D MINI 7 slots mode or 5 slots mode.
- Vertical Graphics card holder for LANCOOL II with PCI-E Riser Cable 200mm
- Allows you display graphics cards while still having room for 2x120mm Fans
- Mounted underneath to create an unobstructed air flow
- Included PCI-E Riser Cable 200mm, allows you to mount a PCI-E 16X Card.
- Upright graphics card bracket for O11D EVO
- New mounting angle for GPU opens room for unrestricted chimney-style configuration.
- Easily and freely adjust the GPU support in 3 directions: horizontal, vertical and along the bracket for ultimate compatibility.
- The dual-slot bracket offers additional rigidity with added pillar support in combination with the holder to easily sustain the weight of the heaviest graphics cards in the market.
- Fully addressable RGB LEDs deliver smooth and bright lighting that syncs to supported RGB software for a full system personalization.
- compatible with ATX and E-ATX sized motherboard. Provide extra support to graphic cards.Improves the look of your PC.
- Doesn’t Restrict Airflow while Remaining the Structure
- Improve the look of your PC
- Fits ATX cases with bridgeless expansion slot covers (no bars between slots), such as the Define 7 Compact, Define 7, Define 7 XL, Meshify 2 Compact, Meshify 2, Meshify 2 XL and Torrent
- • Supports full-length GPUs with single or dual-slot brackets and coolers of any size
- • Places the GPU away from the side panel
- PCI-e 4.0 X16 riser cable
- Vertical GPU kit for O11D Mini
- NOT fit PC-O11 Dynamic or XL
- Expansion Slot: 4
- Material: Steel
- Upright graphics card accessories for O11D EVO
- New mounting angle for GPU opens room for unrestricted chimney-style configuration.
Reviews
There are no reviews yet.