Kingston HyperX Fury 4GB (1 X 4GB) DDR3 1866MHz CL10 RAM (Blue) (HX318C10F-4)

Kingston HyperX Fury 4GB 1866MHz DDR3 RAM - Blue (HX318C10F-4)

Feature

Kingston HyperX HX318C10F/4 is a 512M x 64-bit (4GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below.

Features

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 933MHz fCK for 1866Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow
• seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• Height 1.291” (32.80mm) w/heatsink, single sided component

For higher performance upgrades, increased in-game FPS and an overall faster system.

Started in 2002, HyperX has grown over the years to encompass multiple product lines of memory modules, solid-state drives, USB Flash drives, headsets and mouse pads. Featuring best-in-class components that deliver superior performance, quality and aesthetic design for more than a decade, HyperX products are the choice of top-rated gamers, tech enthusiasts, and overclockers worldwide.

Effortless Upgrade, Relentless Style

Get in the game with HyperX FURY. Even newbies get up to speed fast, since FURY automatically recognizes its host platform and automatically overclocks to the highest frequency published - up to 1866MHz¹ - providing plenty of power for your next deathmatch.

FURY's asymmetric heatspreader design lets you stand out from the 'square' crowd. It's available in black, blue, red and- for the first time in the HyperX line -white, with a black PCB. So your rig can reflect your style and you can show it off with pride - without spending a lot, since FURY is affordably priced. It's 100-percent tested and LAN-ready plus it's backed by a lifetime warranty and technical support.

¹HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS.

Automatic Overclocking HyperX FURY is available in frequency speeds from 1333MHz to 1866MHz. Reach faster speeds and higher capacities by just installing the memory, no adjustments in BIOS needed.	Available in Kits of 2 Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness.	Find the Color that Matches Your System Make sure your system looks as good as it performs. With multiple colors to choose from HyperX FURY is sure to go with that custom case mod you've been working on.

Compatible with Intel and AMD Platforms No matter if you are an Intel or AMD gamer the HyperX FURY is right for you. To make sure it works HyperX FURY has been tested with all popular brands of motherboards.	Lifetime Warranty with Technical Support When you spend that much time building your perfect system make sure your memory lasts. With HyperX memory you get a lifetime warranty and technical support to help you out if you're in a tight spot.	From HyperX, a Leader in eSports HyperX supports some of the best gaming teams in the world. While you might not be a pro yet, you can certainly game with the same equipment they do.