Corsair 5000D Airflow Mid Tower Cabinet (White)
₹12,599.00
Corsair 5000D Airflow Mid Tower Cabinet (White)
Corsair 5000D Airflow ATX Mid Tower Cabinet (White) With Tempered Glass Side Panel, 360mm Radiator Mount, 7 + 2 Vertical Expansion Slot 7 Fan Mounts and A High Airflow Form Factor.
Features
Corsair 5000D Airflow MID-TOWER ATX CASE FOR AN IMMACULATE BUILD THAT KEEPS ITS COOL
The CORSAIR 5000D AIRFLOW is a mid-tower ATX case with easy cable management for a clean build, with room for a 360mm push pull radiator, a high-airflow front panel, and two included CORSAIR AirGuide fans for concentrated airflow.
Clean and Cool
An optimized steel front panel delivers massive airflow to your system for maximum cooling.
Maximum cooling potential
A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front or side and a 360mm push/pull in the roof.
There’s no replacement for displacement
The 5000D AIRFLOW isn’t your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion capability for liquid cooling.
Powerful directed Airflow
Equipped with two CORSAIR AirGuide 120mm fans featuring anti-vortex vanes to concentrate airflow and enhance cooling.
Take command of your cooling
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.
Extreme Cooling
Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.
Dimensions
Expansion-friendly, the 5000D Airflow has room for extensive air or liquid cooled configuartions.
Fan Capacity
Fan mounts feature wider cutouts, allowing fan placement customization and flexibility.
Radiator Capacity
Install two simultaneous 360mm radiators in any of three 360mm radiator mounting locations to keep things cool.
All the storage you need
FITS UP TO 4X 2.5IN SSDS and 2X 3.5IN HDDS
CORSAIR RapidRoute Cable Management
Quickly and easily route your major cables through a single hidden channel, with a roomy 25mm of space behind the motherboard for all of your cables, easily concealed by a hinged steel door.
Corsair 5000D Airflow Modern Front Panel I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
- Power Button
- 2x USB 3.0 ports
- USB 3.1 Type-C port
- Headphone/Mic Combo Jack
- Reset button
Vertical GPU Mount Ready
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.
| Case Dimensions | 520mm x 245mm x 520mm |
| Maximum GPU Length | 420mm |
| Maximum PSU Length | 225mm |
| Maximum CPU Cooler Height | 170mm |
| Expansion Slots | 7+2 vertical |
| Case Drive Bays | ”(x2) 3.5in (x4) 2.5in” |
| Form Factor | Mid-Tower |
| Case Windowed | Tempered Glass |
| Corsair Link Enabled | No |
| Case Material | Steel, Tempered Glass, Plastic |
| Radiator Compatibility | 120mm, 140mm, 240mm, 280mm, 360mm |
| Compatible Corsair Liquid Coolers | H55, H60, H75, H80i, H90, H100i, H105, H110i, H115i, H150i |
| Case Power Supply | ATX (not included) |
| Weight | 13.84 |
| Drive Bays 3.5" | 2 |
| Drive Bays 2.5" | 4 |
| Color | White |
| Warranty | 2 Years |
| Note | ***Features, Price and specifications are subject to change without notice. |
Corsair 5000D Airflow Mid Tower Cabinet (White)
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Huge dual-chamber mid-tower case with an addressable RGB strip alongside the front panel.
- The front lighting effect can be controlled through the M|C buttons on the front; switch to the 8th mode you’ll be able to sync it with the motherboard.
- Front and left-side panel in tempered glass combined with premium aluminum top and right-side panel.
- Spacious interior for a huge motherboard and 446mm long graphics cards.
- Optimized internal design to accommodate 3 x 360mm radiators and 10 x 120mm fans.
- Equipped with two hot-swappable bays, which allows you to remove and replace the 4 x HDD/SSD without shutting down the system.
- 2 x USB 3.0 on the top right and 2 x USB 3.0 bottom right to be more ergonomic whether the case is placed on or under the desk.
- Matrexx 40 3FS Optimized Micro-ATX design
- Three 120mm tri-color LED fans included
- Tempered glass side panel
- Mesh top and front panel
- Support up to six 120mm or four 140mm cooling fans
- Support for radiators up to 280mm on top and in front
- Removable drive cage
- Elegant Design: Elegant gloss black design with front mesh panel.
- Spacious Interiors: Can house a long graphics card of up to 410mm in length along with a 360mm radiator.
- Vertical GPU mount: The case has 7 expansion slots and 2 vertical slots for graphics card mount.
- Build-in ARGB Controller: Comes with a build-in controller for easy control over the fans.
- Four A-RGB fans: Comes with Four 120mm auto RGB fans pre-installed in the front and one at the back.
- Impressive Front Panel: A mix of mesh and slits the front panel is well ventilated and has an X-shaped ARGB strip to complete the package.
- Fully Loaded IO panel: 2 x USB 2.0, 1 x USB 3.0, 1 x Audio In, 1 x Mic and one SD/TF Card Reader
- Optimum cooling: The case comes with one 120mm fan installed at the back and can accommodate a total of six 120mm fans for an optimum cooling experience.
- Liquid cooling: Can house a 120mm at the back of a 120mm or 240mm in the front.
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design
- Steel 4.0mm tempered glass (both sides) ; (D) 462mm x (W) 215mm x (H) 482mm
- Drive : Behind MB Tray: 2 x 2.5″ SSD Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
- Motherboard : E-ATX(width: under 280mm)/ATX/M-ATX/ITX
- Fan Support : Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm or 2 x 140mm Top of PSU chamber: 2 x 120mm
- I/O Ports : Power button Reset button LED button for lighting mode control 1 x HD AUDIO 2 x USB 3.0
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 RGB fans on Front, 1 Non RGB Rear Fan and 6 Pin RGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
- Macube 110 Refined minimalism design
- Macube 110 Magnetic tempered glass side panel
- Mesh top panel
- Support up to six 120mm or four 140mm cooling fans
- Support radiators up to 280mm on top and in front
- Removable drive cage
- Adjustable GPU holder included
- CL500 4F AP Large mesh front panel
- Magnetic side panels, one with tempered glass
- 4 A-RGB fans included
- Support 120/240/280/360mm AIO radiator
- Support up to six 120mm fans
- Built-in fan hub
- Premium look
- Unprecedented modularity
- Hinged flip panels all around
- Optimized cooling support
- Cable management with ease
- Optimized storage configuration
- Futuristic Front Design: Impressive space ship-inspired conical front panel design to make it stand out from the crowd.
- Ideal for liquid cooling: With support for a 240mm/280mm radiator in the front and a 240mm on top the case is built for liquid cooling.
- Well equipped IO Panel: 1 x USB 3.0, 2 x USB 2.0, 1 x Audio, 1 x Mic and Reset button laid out in a vertical fashion for an edgy look.
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design.
- ARGB Fans pre-installed: Comes with two 120mm ARGB fans out of the box.
- Two-Tone Design: A stunning two-tone design on the front panel to show off that ARGB fan in the front.
- ARGB Fans: Equipped with 4x ARGB 120mm fans, your customization options are endless.
- Tempered Glass Side Panel: A 4mm tempered glass side panel lets you show off everything you have in your system.
- Insta-Light Loop Button: Create profiles and quickly control the fan color and lighting effects with the Insta-Light Loop button.
- Matrexx 55 V3 A compact ATX computer case supports motherboards up to E-ATX.
- Full sized 4mm thickness, tempered glass side panel and the front panel give the case a unique look and perfectly show off your inner structure.
- The addressable RGB lighting strip in the front, is easily controlled by manual button or via motherboard; Two extra connectors are ready for motherboard SYNC control with any combination with other DEEPCOOL/GAMER STORM brand 5V ADD-RGB devices and also other brand 5V ADD-RGB devices.
- Matrexx 55 V3 Supports installation of 120/140/240/280/360mm radiator liquid cooling system in the front, 120/140/240mm radiator liquid cooling system on top and 120mm radiator liquid cooling system in the back.
- Supports 370mm (MAX) long Graphic Card installation.
Optimized airflow is guaranteed with large air intakes on two sides of the front panel, keeping your components cool. - The 210mm wide tower compartment with 23mm clearance is perfect for cable management.
- A magnetic dustproof net on top and dust-filter in the front and bottom.
- With PSU shroud to keep internal neat and tidy.
Reviews
There are no reviews yet