Arctic P12 PWM PST ARGB Cabinet Fan (Triple Pack)
- Arctic P12 PWM ARCTIC launches their new CPU A-RGB Case Fan with P12 PWM PST A-RGB 120mm Fan. The PWM controlled is designed with PST technology which allows that all of your fans listen to one control signal and to stand down at low load and spin up whenever necessary.
- The fan provides a rotational speed of up to 2000 rpm at a low noise level of 0.3 Sone. Developed with a motor which is a combination of alloy/lubricant gives reduced friction and noise.
- Comes with 4-pin connector with 4-Pin socket. The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation.
- The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other. Can be illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised
Original price was: ₹7,999.00.₹3,599.00Current price is: ₹3,599.00.
Arctic P12 PWM PST ARGB Cabinet Fan (Triple Pack)
Features:
Arctic P12 PWM RGB FOR FULL COLOUR CONTROL
The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
Arctic P12 PWM 0dB Mode – Zero RPM
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
MAXIMUM SMOOTHNESS, MINIMUM VIBRATION
The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB 0dB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
OPTIMISED FOR HIGH STATIC PRESSURE
The P12 PWM PST A-RGB 0dB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
0 TO 2000 RPM CONTROLLED VIA PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB 0dB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
Arctic P12 PWM HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.
| Brands | |
|---|---|
| Fan Size | |
| FAN Speed | |
| Case Fan Pack | |
| EAN / UPC Code |
Q & A
Arctic P12 PWM PST ARGB Cabinet Fan (Triple Pack)
Related Products
- The MAG FORGE 110R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- SUPPORTS ATX / M-ATX / Mini-ITX MOTHER BOARDS
- Quickly control the fan color and lighting effects with Insta-Light Loop at the touch of a button. Click through the profiles at ease and choose a favorite.
- The MAG VAMPIRIC 100 Series reveals your arsenal with a tempered glass side panel. Arm the system with MSI’s liquid cooler, motherboard, and graphics card for the ultimate display of power and performance.
- A magnetic filter sits on the top vents keeping dust from falling inside while being easily removed for cleaning.
- The MAG VAMPIRIC 100 Series has been engineered to focus air flow across the system for incredible cooling performance. Up to 6 fans can be installed.
- Antec DP505 Maximum Expansion Potential: 2 x 360mm can be installed in the front & on the top simultaneously.
- Antec DP505 Massive Mesh Front Panel with X-Shaped Design.
- Three addressable RGB fans Included.
- Built-in ARGB & PWM Control Hub: The control hub supports up to 6 fans and 6 LED device.
- Space for cable management: 23mm
- F-LUX Platform: Advanced case structure for excellent airflow + 5 x 120 mm fans included
- ARGB & PWM Fan Controller
- Provide massive airflow to your components with room for up to 9 x 120 mm fans
- Supports a high-end GPU and provides the best cooling for it
- Ready for a radiator up to 360 mm in front, 360 mm on top & 120 mm in rear
- MSI MAG VAMPIRIC 010 chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- Black, Mid Tower, 467 x 220 x 486 mm(DxWxH), Steel + Plastic, 4 mm Tempered Glass Side Panel
- Expansion & Drive Bays : Expansion Slots x 7, 3.5″/2.5″ (convertible) x 3/2, 2.5″ x 3
- Included Fan(s) : 3 x 120mm ARGB fans in front, 1 x 120mm fan (Reverse Fan) on PSU shroud & 1 x 120mm fan in rear
- Front Access & Controls : Power, LED Control Button, 2 x USB3.0, HD-AUDIO
- Radiator Support: Front -120/240/280/360mm (≤ 55mm thickness when fans are installed outside of front panel) (≤ 30mm thickness when fans are installed inside of front panel) , Top : 120/240/280/360mm, Rear : 120mm
- Simple assembly with interlocking and daisy chain functionality
- Only two cables required for a cluster of fans
- Aesthetic look with aluminum medallion and LEDs on both sides
- Customized LEDs on fan blades and the inner edge of the fan frame
- Multiple lighting effects/fan speed control via L-connect software
- Improved static pressure and airflow while remaining silent
• Arctic Liquid Freezer II High static pressure for improved cooling performance |1.85 mm H2O
• Extended speed range | 200 – 2000 rpm (1800 rpm on the radiator)
• Low power consumption | 0.11A (0.2A RGB)
• Less vibration and rubber bumpers | reduced by > 95%
• Improved lifetime | 6 years warranty
• High quality plain bearing
• PWM for synchronous pump/fan control
• RGB sharing for synchronous lighting
- Fluid Dynamic bearing
- Built in 10 RGB effects with three button controller
- Compatible with motherboard 5V addressable header
- Fan Speed: 900~1800 RPM
- Max. Air Flow: 57.97 CFM
- Air volume: 57 CFM
- Maximum speed: 2000+-10% rpm
- Avg. Noise: <=27db
- Rated current: 0.23A
- Hydraulic Ball Bearing
- 3 Pin 5V Addressable RGB
- Supports AMD Ryzen™ 5000 Series/ 3rd Gen Ryzen™ and 3rd Gen Ryzen™ with Radeon™ Graphics Processors
- Dual Channel ECC/ Non-ECC Unbuffered DDR4, 4 DIMMs
- 5+3 Phases Pure Digital VRM Solution with Low RDS(on) MOSFETs
- Ultra Durable™ PCIe 4.0 Ready x16 Slot
- Dual Ultra-Fast NVMe PCIe 4.0/3.0 M.2 Connectors
- Onboard Intel® Dual Band 802.11ac Wireless & BT 4.2 with WIFI Antenna
- High Quality Audio Capacitors and Audio Noise Guard for Ultimate Audio Quality
- GIGABYTE Exclusive 8118 Gaming GbE LAN with Bandwidth Management
- Rear HDMI & DVI Support
- RGB FUSION 2.0 Supports Addressable LED & RGB LED Strips
- Smart Fan 5 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP
- Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card
- Anti-Sulfur Resistors Design
Reviews
There are no reviews yet