Antec Performance 1 FT (E-ATX) Full Tower Cabinet (Black)
₹15,449.00
Antec Performance 1 FT (E-ATX) Full Tower Cabinet (Black)
Antec Performance 1 FT is a full tower E-ATX PC Cabinet. Both side panels adopt tempered glass for better PC showcase visual effects. The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Features:
SYSTEM STATUS WITH A GLANCE
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.
4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.
Cable Management on Point
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management.
- Three sets of velcro straps for fan & I/O cable routing.
- Five velcro straps for hardware and power supply cables.
- Two velcro straps at the rear for rear I/O cable routing.
PRE-INSTALLED 4 FANS OF 30MM THICKNESS
Storm T3 PWM Fan
- 3 x Storm T3 140mm PWM Fans at the Front.
- 1 x Storm T3 120mm PWM Fan at the Rear.
COOLING COMPATIBILITY
Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling
- Top: Magnetic dust filter.
- Front: Magnetic & clip-on dust filter.
- Bottom: Full-sized pull-out dust filter.
Supports RTX 40 Series Graphics Cards
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Best Cooling Design
- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
- Supports 360mm radiators at the front and top simultaneously.
- Up to 10 fans simultaneously.
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5″ HDD/2.5″ SSD & 3 drive trays for 2.5″ SSD.
| Model | Performance 1 FT |
| Color | Black |
| Dimensions | 522 x 230 x 522 mm (DWH) |
| Form Factor | Full Tower |
| Materials | Steel + Plastic + Glass |
| Mainboard Support | E-ATX, ATX, Micro-ATX, ITX |
| Front Access & Controls | Power, Reset , USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1 |
| Side Panel | 4mm Tempered Glass(Both Sides) |
| Drive Bays | |
| Expansion Slots | 8 |
| 3.5" / 2.5" | 2/2 |
| 2.5" | 3 |
| Fan Support | |
| Front | 3 x 120mm / 3 X 140mm |
| Top | 3 x 120mm / 3 x 140mm |
| Power Supply Shroud | 3 x 120mm |
| Rear | 1 x 120mm |
| Included Fan(s) | 3 x 140 x 30mm PWM fans in front + 1 x 120 x 30mm PWM fan in rear Pre-installed Storm T3 PWM fan specs vary from the retail version |
| Radiator Support | |
| Front | 120 / 140 / 240 / 280 / 360 / 420mm |
| Top | 120 / 140 / 240 / 280 / 360mm |
| Rear | 120mm |
| Clearance | |
| Max GPU Length | ≤ 400mm |
| Max CPU Cooler Height | ≤ 175mm |
| Max PSU Length | (Include cable) ≤ 245mm(with HDD) (Include cable) ≤ 440mm(without HDD) |
| Miscellaneous | |
| Dust Filter | Front / Top / Bottom |
| Net Weight | 12.55Kgs |
| Gross Weight | 14.85Kgs |
| Warranty | 2 Years |
| Note | *** Features, Price, Specifications are subject to change without notice. |
Antec Performance 1 FT (E-ATX) Full Tower Cabinet (Black)
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Stylish RGB Light on Black Tempered Glass Front panel
- With RGB LED Switch and 2 USB 3.0 on I/O Panel
- Full-Size Black Tempered Glass Side Panel
- PSU Shroud Design
- Detachable Dust Filter
- Liquid Cooling Compatible
- MSI MAG VAMPIRIC 010 chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- Mid-tower chassis with two modes: Normal Mode/ Reverse Mode
- Feature multi-directional power button and movable IO module
- Front and side tempered glass panels for components and RGB display
- Supports up to 3x 360 radiators and a maximum of 10 fans
- Offers 9 storage drives mounting space
- Dual-chamber layout with hooks friendly cable management compartment
- Five optional accessories: Vertical GPU Kit / Upright GPU Kit / Additional I/O kit / Front Mesh Kit / Top I/O Kit
- Synergize MPG SEKIRA 100 Series with an MSI motherboard by bridging a USB Gen2 Type-C port with 10 Gbps for convenient access.
- Mid-Tower gaming PC case that supports E-ATX / ATX / M-ATX / Mini ITX
- The MPG SEKIRA 100R comes with 4 fans and has room for up to 6 fans.
- The top vent lid provides additional system airflow and comes with a magnetic dust filter for easy removal and cleaning.
- A total of three filters have been placed to prevent dust from entering the system.
- Elegant Design: Elegant gloss black design with front mesh panel.
- Spacious Interiors: Can house a long graphics card of up to 410mm in length along with a 360mm radiator.
- Vertical GPU mount: The case has 7 expansion slots and 2 vertical slots for graphics card mount.
- Build-in ARGB Controller: Comes with a build-in controller for easy control over the fans.
- Four A-RGB fans: Comes with Four 120mm auto RGB fans pre-installed in the front and one at the back.
- Unorthodox Looks – Stylish front mesh panel with three ARGB 120mm fans for that mean yet clean look.
- Ample Cooling – Can house eight 120mm fans out of which four come pre-installed.
- Dual Dust filters – The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors – Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- 3*CF 120 RGB fans and 1*RGB LED strip pre-installed and synced
- Matrexx 70 Included ADD-RGB system controllable by either case button or motherboard, and compatible to other brands ADD-RGB products.
- Large mid tower case supporting up to E-ATX(330mm) motherboard.
- 228mm wide tower compartment with 30mm clearance for cable management
Easy-to-install front and side panels - Quick-mounting radiator/fan holders pre-installed at the front Supports installation of 120/140/240/280/360/420mm radiator liquid cooling system at front,120/140/240/280/360mm radiator liquid cooling system at top, 120mm radiator liquid cooling system at rear Removable tempered glass PSU-HDD top cover, offering top-notch lighting ambient.
- Magnetic dust filters at the top, insert-in dust filters at bottom and front
- Impressive Front Panel: A mix of mesh and slits the front panel is well ventilated and has an X-shaped ARGB strip to complete the package.
- Fully Loaded IO panel: 2 x USB 2.0, 1 x USB 3.0, 1 x Audio In, 1 x Mic and one SD/TF Card Reader
- Optimum cooling: The case comes with one 120mm fan installed at the back and can accommodate a total of six 120mm fans for an optimum cooling experience.
- Liquid cooling: Can house a 120mm at the back of a 120mm or 240mm in the front.
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Two-Tone Design: A stunning two-tone design on the front panel to show off that ARGB fan in the front.
- ARGB Fans: Equipped with 4x ARGB 120mm fans, your customization options are endless.
- Tempered Glass Side Panel: A 4mm tempered glass side panel lets you show off everything you have in your system.
- Insta-Light Loop Button: Create profiles and quickly control the fan color and lighting effects with the Insta-Light Loop button.
- Awesome front Panel with RGB strip – The front panel is a combination of a matte finish and mesh bottom along with an intricately placed RGB strip for the perfect look.
- Ample Cooling: Can house eight 120mm fans out of which one rear fan comes pre-installed.
- Dual Dust filters: The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors: Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Well populated IO panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button.
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 RGB fans on Front, 1 Non RGB Rear Fan and 6 Pin RGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
Reviews
There are no reviews yet