Antec C8 ARGB (E-ATX) Full Tower Cabinet (White)
- Support RTX 40 Series Graphics Cards.
- Top and Bottom Cooling: Accommodates Three 140mm Fans and Space for Two 160mm Fans for Efficient GPU Cooling.
- Unique Rear Compatibility: Supports 140mm Fans, Setting It Apart from Competitors.
- Supports 360mm Radiators on Top, Bottom, and Right Panels for Liquid Cooling.
- Type-C 10Gbps Port on the Top for High-Speed Connectivity.
Original price was: ₹20,000.00.₹11,599.00Current price is: ₹11,599.00.
Seamless edge on front & side panel
The front and left panel employ a unique 45° beveling technique that breaks the barrier between the two pieces of glass. The extremely fine edge of the glass joint enhances the uninterrupted, panoramic, and ultra-transparent visual experience of the 270° view, allowing comprehensive showcase of high-end PC components and dazzling lighting effects.
Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.
Bottom fan configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.
Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.
Best Cooling Design
Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.
cavernous space for extreme liquid cooling
Antec Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.
Best Cooling Design
Up to 10 fans simultaneously.
Supports 2 x 160mm fans on top / 2 x 160mm fans on bottom / 1 x 140mm fan at rear
Air intake and dust filter
TOP | Full mesh panel
RIGHT SIDE | Full mesh panel
Bottom | Full-sized pull-out dust filter
0.8mm + 1.0mm thick steel & Tool-Free design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.
Graphics cards installation
Provides ample width to perfectly support wider RTX40 series GPU.
Supports vertical GPU riser brackets after removal.
Features 8 reusable PCIe slot covers.
POWER SUPPLY INSTALLATION
Stylish PSU bracket with rubber pad to prevent scratch
Vast room to house power supplies up to 210mm in length
Support side-interface power supplies
Cable Management
Interior velcro strap x 4
Rear velcro strap x 2
Cable routing rubber grommet x 6
Modular Drive Trays
Supports up to 6 drives: 2 x 3.5″ HDD & 4 x 2.5″ SSD
| Model Number | C8-WHITE-ARGB |
| Dimensions | 464 x 303 x 476mm (DWH) |
| Form Factor | Full Tower |
| Materials | Steel + Plastic + Glass |
| Mainboard Support | E-ATX (280mm), ATX, M-ATX, ITX |
| Front Access & Controls | Power, Reset, USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack |
| Side Panel | 4mm Tempered Glass |
| Drive Bays | |
| Expansion Slots | 8 |
| 3.5 | 2 |
| 2.5" | 4 |
| Fan Support | |
| Top | 3 x 120 / 3 x 140 / 2 x 160mm |
| Side | 3 x 120 / 2 x 140mm |
| Bottom | 3 x 120 / 3 x 140 / 2 x 160mm |
| Rear | 120 / 140mm |
| Included Fan(s) | 2 x 160 x 35mm Tranquil Reverse ARGB PWM fans at bottom 2 x 160 x 35mm Tranquil Reverse ARGB PWM fans at bottom+ 1 x 140 x 25mm Tranquil ARGB PWM fan at rear |
| Radiator Support | |
| Top | 120 / 140 / 240 / 280 / 360mm |
| Side | 120 / 140 / 240 / 280 / 360mm |
| Bottom | 120 / 140 / 240 / 280 / 360mm |
| Rear | 120mm |
| Clearance | |
| Max GPU Length | ≤ 440mm |
| Max CPU Cooler Height | ≤ 175mm |
| Max PSU Length | ≤ 210mm (without cable) |
| Miscellaneous | |
| Dust Filter | Bottom |
| Net Weight | 11.84kg |
| Gross Weight | 14.38kg |
| Warranty | 2 Years |
| Note | *** Features, Price, Specifications are subject to change without notice. |
| Weight | 2 kg |
|---|---|
| Product Type | |
| color | |
| Brands | |
| Case Form Factor | |
| Motherboard Size | |
| Lighting Type | |
| Radiator Size | |
| Side Panel | |
| Warranty | |
| EAN / UPC Code |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Ample of storage options: The case has four exclusive SSD mounts and two HDD cages under the PSU shroud.
- Spacious Interiors: Can house motherboards of up to EATX standards along with a 360mm radiator
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design
- Functional IO Panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button
- Three Auto-RGB fans: Comes with three 120mm Auto-RGB fans pre-installed in the front and one black fan at the back to cut down overall costs of the buyer.
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Impressive Front Panel: A mix of mesh and slits the front panel is well ventilated and has an X-shaped ARGB strip to complete the package.
- Fully Loaded IO panel: 2 x USB 2.0, 1 x USB 3.0, 1 x Audio In, 1 x Mic and one SD/TF Card Reader
- Optimum cooling: The case comes with one 120mm fan installed at the back and can accommodate a total of six 120mm fans for an optimum cooling experience.
- Liquid cooling: Can house a 120mm at the back of a 120mm or 240mm in the front.
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design
- Synergize MPG SEKIRA 100 Series with an MSI motherboard by bridging a USB Gen2 Type-C port with 10 Gbps for convenient access.
- Mid-Tower gaming PC case that supports E-ATX / ATX / M-ATX / Mini ITX
- The MPG SEKIRA 100R comes with 4 fans and has room for up to 6 fans.
- The top vent lid provides additional system airflow and comes with a magnetic dust filter for easy removal and cleaning.
- A total of three filters have been placed to prevent dust from entering the system.
- Up to E-ATX MB Support
- 64 Cores CPU
- Quad Channel RAM
- 456 mm Graphics Card
- Create a 8K Video with effects & color matching.
- Never slow down your editing process of caching, pre-calculating effects & layers and the final rendering.
- Mid-Tower with support for ATX / micro ATX / Mini-ITX Motherboards featuring a brushed aluminium chassis
- Two hinged swing-doors with premium-quality 4mm thick tempered glass design guarantees window durability and viewing capability
- Personalize Your Gaming Rig with a built in 1 to 8 ARGB LED hub and 4 ARGB fans + 1 system fan
- Custom Liquid Cooling Ready features an extractable radiator bracket which supports for radiators up to 360mm in length
- MSI Mystic Light RGB lighting software features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of Mystic Light Sync enabled product
- Preinstalled Fans : Front: 1 x 200mm ARGB LED Fan included, Top: 2 x 200mm ARGB LED Fan included and Rear: 1 x 120mm ARGB LED Fan included
- Two-Tone Design: A stunning two-tone design on the front panel to show off that ARGB fan in the front.
- ARGB Fans: Equipped with 4x ARGB 120mm fans, your customization options are endless.
- Tempered Glass Side Panel: A 4mm tempered glass side panel lets you show off everything you have in your system.
- Insta-Light Loop Button: Create profiles and quickly control the fan color and lighting effects with the Insta-Light Loop button.
- Optimized Micro-ATX design
- Tempered glass side panel
- Mesh top and front panel
- Support up to six 120mm or four 140mm cooling fans
- Support for radiators up to 280mm on top and in front
- Removable drive cage
- Synergize the MPG GUNGNIR 110M with a MSI motherboard through the USB 3.2 Gen 2 Type-C port.
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 3 Auto RGB fans plus one system fan and has room for up to 6 fans. Fans are Mystic Light compatible.
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- The MPG GUNGNIR 110M’s front features a filtration panel that lets in maximum airflow.
- Unorthodox Looks – Stylish front mesh panel with three ARGB 120mm fans for that mean yet clean look.
- Ample Cooling – Can house eight 120mm fans out of which four come pre-installed.
- Dual Dust filters – The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors – Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 RGB fans on Front, 1 Non RGB Rear Fan and 6 Pin RGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
- Black/Mid-Tower/357 x 200 x 438 mm
- Drive Bays: 3.5 Inch x 2 / 2.5 Inch x 2 I Expansion Slots x 7
- Tempered left side Panel with
- I/O Panel: Power Button, Reset Button, 1 x USB 3.0, 2 x USB 2.0, 1 x Audio in, 1 x Mic
- Pre-installed: 2 x 180 mm Rainbow Front Fans and 1 x 120 mm Rear Fan
- Liquid Cooling Support: 310 mm VGA Card Length, 160 mm CPU Cooler Height
Reviews
There are no reviews yet