Adata XPG Hunter 16GB (16GBx1) DDR5 5200MHz Desktop RAM (Black)
- New speed benchmark for gaming memory
- PMIC for power supply stability
- On-die ECC error correction
- Supports Intel® XMP 3.0 for easy overclocking
- Performance of up to 5200 MT/s
- RoHS compliant
Original price was: ₹7,999.00.₹4,149.00Current price is: ₹4,149.00.
Out of stock
Email when stock available
ADATA XPG HUNTER 16GB (16GBX1) DDR5 5200MHZ MEMORY
Like its predecessor, the all-new Adata XPG HUNTER series DDR5 DRAM brings you the performance and reliability you need, but made even better. It offers upgraded performance of 5200MT/s and sport PMIC and On-die ECC for enhanced stability.
The XPG HUNTER ushers in the DDR5 era for gaming memory. Reaching frequencies of up to 5200MT/s, it’ll give you a major performance boost for gaming and overclocking.
A New Speed Benchmark for Gaming Memory
The Adata XPG HUNTER ushers in the DDR5 era for gaming memory. Reaching frequencies of up to 5200MT/s, it’ll give you a major performance boost for gaming and overclocking.
Enhanced Power Management
The Adata XPG HUNTER DDR5 features a built-in Power Management IC (PMIC) that enhance power supply stability. It’s lower operating voltage also make HUNTER more power-efficient than DDR4.
Stability and Reliability
With On-die error correcting code (ECC), this DDR5 memory module can correct errors in real-time to provide increased stability and reliability.
Overclocking Made Easy
With support for Intel XMP 3.0, get overclocking easily without the need to constantly hassle with BIOS settings and overclocking parameters.
QuikTips: DDR5 vs DDR4 – Appearance
DDR5 U-DIMM modules have the same dimensions and pin count as DDR4 modules. The most obvious difference is the position of the fool-proof notch. Also, DDR5 integrates I/O resistors with CMD/ADD resistors. Also, the appearance of DDR5 modules are cleaner than DDR4. In addition, you can see a PMIC in the center.
QuikTips: DDR5 vs DDR4 – Chip Architecture
DDR5 modules provide two times more capacity than DDR4 by packing in more banks and bank groups. In addition, Burst Length and Prefetch are also doubled. And to ensure data integrity, they feature error correcting code (ECC) technology.
QuikTips: DDR5 vs DDR4 – Performance
The biggest change is that bandwidth and frequency are significantly higher. The ADATA DDR5 memory modules deliver frequencies of up to 4800MT/s and feature bandwidth of 38.4GB/s, which is 50% higher than the DDR4-3200. The maximum frequency is increased 1.63 times compared to DDR4.
QuikTips: DDR5 vs DDR4 – Comparison Table
This specification comparison table shows the advantages of DDR5.
| Weight | 1 kg |
|---|---|
| Brands | |
| RAM Frequency | |
| RAM Size | |
| RAM Type | |
| Memory Kit | |
| Memory Type | |
| EAN / UPC Code |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- CL 16 Low-Latency
- Outshine the Competition
- More RGB per mm2
- Diamond-Cut Design
- Stable, Durable and Reliable
- Overclocking with Intel® XMP 2.0
- Programmable RGB Lighting
- Ready for AMD- and Intel-based systems
- Capacity 8GB DRAM Type DDR4
- Form Factory DDR4 Long Dimm Frequency (speed) 3200MHz CAS Latency CL19(3200)
- Operating Temperature 0*C to 85*C Storage Temperture -55*C to + 100*C
- Voltage 1.2 V Pins 288-PIN
- Warranty 10 Years
- Corsair Vengeance Lpx XMP 2.0 SUPPORT: One setting is all it takes to automatically adjust to the fastest safe speed for your VENGEANCE LPX. Tested Voltage 1.35V
- ALUMINUM HEAT SPREADER: The unique design of the VENGEANCE LPX heat spreader optimally pulls heat away from the ICs and into your system’s cooling path, so you can push it harder.
- DESIGNED FOR HIGH-PERFORMANCE OVERCLOCKING: Each VENGEANCE LPX module is built from an custom performance PCB and highly-screened memory ICs.
- LOW-PROFILE DESIGN: The small form factor makes it ideal for smaller cases or any system where internal space is at a premium. SPD Latency 15-15-15-36
- Corsair Vengeance Lpx XMP 2.0 SUPPORT: One setting is all it takes to automatically adjust to the fastest safe speed for your VENGEANCE LPX. Tested Voltage 1.35V
- ALUMINUM HEAT SPREADER: The unique design of the VENGEANCE LPX heat spreader optimally pulls heat away from the ICs and into your system’s cooling path, so you can push it harder.
- DESIGNED FOR HIGH-PERFORMANCE OVERCLOCKING: Each VENGEANCE LPX module is built from an custom performance PCB and highly-screened memory ICs.
- LOW-PROFILE DESIGN: The small form factor makes it ideal for smaller cases or any system where internal space is at a premium. SPD Latency 15-15-15-36
- Mesmerizing RGB lighting -supports software from major motherboard makers, fully customizable and programmable
- More RGB per mm2 -That equates to over 60% of the module’s surface area.
- Supports the new Intel X299 platform and implements baseline 3000MHz (via SPD settings)
- Fast clock speed 3200MHz
- Intel XMP 2.0 -more accessible overclocking
- RoHS compliant
- EVM 2GB DDR2 Laptop RAM is designed to help your system to load pages faster and launching new applications quicker.
- The memory module operates at speeds up to 667MHz and has CAS Latency of 11.0/9.0/7.0.
- All EVM memory is backed by 100% testing, a lifetime warranty and over 10 years of design and manufacturing expertise.
- No more performance problem and no more squabbles. EVM offers extremely reliable, high performance memory modules for your computer.
- Corsair VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.
- VENGEANCEvLPX isv optimized and tested for the latest AMD and Intel DDR4 motherboards and offers higher frequencies, greater bandwidth, and lower power consumption. XMP 2.0 support for trouble-free automatic overclocking. Fan Included: No
- The VENGEANCE LPX module height is carefully designed to fit smaller spaces. Compatibility – Intel 100 Series,Intel 200 Series,Intel 300 Series,Intel 400 Series,Intel 500 Series,Intel X299.
- Corsair Vengeance Available in multiple colors to match your motherboard, your components, or just your style.
- Corsair Vengeance heatspreader is made of pure aluminum for faster heat dissipation, and the custom performance PCB helps manage heat and provides superior overclocking headroom.
- Illuminate your system with dynamic RGB lighting from six individually addressable LEDs, encased in a panoramic light pipe that offers unobstructed viewing from virtually every angle.
- Choose from dozens of preset lighting profiles, or create your own in CORSAIR iCUE software.
- Optimized for maximum bandwidth and tight response times on the latest Intel and AMD DDR4 motherboards.
- A custom performance PCB guarantees strong signal quality for superior performance and stability.
- VENGEANCE RGB RS modules use only tightly screened memory chips for reliably high speeds with the potential for overclocking.
Model – G.Skill Ripjaws V Black
Speed – 3200 MHz
Ram Type – DDR4
Ram Size – 8GB x 1
Tested latency –18-22-22-42
Note – Price, Specifications and Features May Change Without Notice
- Edgy Wing-Shaped Design
- The Performance to Win
- Overclocking with Intel® XMP 2.0
- Top-Quality Chips for Enhanced Durability
- Using strictly selected new Hynix A-die 2GB chips.
- 10-layer PCB construction for enhanced overclocking performance and stability
- High-performance brushed aluminum heat spreader for optimal heat dissipation
- Real-time temperature, frequency and performance monitoring.
- 5V Motherboard RGB sync ready
- Intel XMP 2.0 ready
- Limited lifetime warranty
- Capacity 4GB DRAM Type DDR4
- Form Factory DDR4 SoDimm Frequency (speed) 2666MHz CAS Latency CL19(2666)
- Operating Temperature 0*C to 85*C Storage Temperture -55*C to + 100*C
- Voltage: 1.2 V Pins 260-PIN
- Warranty 10 Years
Reviews
There are no reviews yet