Transcend 240GB SSD220 SATA III 2.5″ Internal SSD
- 240GB Storage Capacity
- 2.5″/7mm Form Factor
- SATA III 6 Gb/s Interface
- TRIM Support
- DevSleep Compatible
- SSD Scope Software Included
Original price was: ₹4,999.00.₹2,755.00Current price is: ₹2,755.00.
Feature
Transcend 240GB SATA III 6Gb/s SSD220S 2.5” Solid State Drive TS240GSSD220S
- Standard 2.5″ form factor with mere 7mm thickness
- SATA III 6Gb/s interface
- Up to 240GB storage capacity
- Up to 500 MB/s read; 330 MB/s write
- 3D NAND flash memory
- Engineered with a RAID engine and LDPC coding
- Built-in SLC caching technology
- Supports DevSleep ultra low power state
- Supports S.M.A.R.T., TRIM and NCQ commands
- Exclusive SSD Scope software
|
|
|
|
|---|---|---|
Transfer Speed, Transfer PerformanceTranscend’s SSD220 provides an incredible 4K random read and write performance of up to 550MB/s, making it the perfect alternative as a boot disk to load your everyday computing tasks and programs in just seconds. Taking full advantage of the SATA III 6Gb/s interface and built in with SLC caching technology, the SSD220 achieves exceptional transfer speeds of up to 540MB/s read and 500MB/s write. |
Endurance. ReliabilityIn addition to blazing-fast transfer speeds, the SSD220 is engineered with a RAID engine and LDPC (Low-Density Parity Check) coding, a powerful ECC algorithm, in order to keep your data secure. Built-in wear-leveling technology ensures data integrity during transmission, prolonging the lifespan of Transcend’s SSD220. |
Save Power, Save TimeWith full support of SATA Device Sleep Mode (DevSleep), the SSD220 can prolong notebook battery life by intelligently shutting down the SATA interface when it is not in use. DevSleep features an ultra-low power state to conserve battery power. With a remarkable response time of less than 20 milliseconds, you can get back to work instantaneously. |
|
|
|
|
|---|---|---|
Take Control with SSD ScopeTo keep your Transcend SSD running fast and error-free, Transcend’s advanced SSD Scope software application is available for download for use with the SSD 220. Monitor your SSD’s health status with S.M.A.R.T. technology, enable the TRIM command for optimum write speeds, keep your SSD’s firmware up-to-date, and migrate data from your original drive to a new SSD with just a few clicks. |
Ultra-Slim, Ultra-PortableTo The SSD 220 features an industry-standard 2.5″ form factor. Yet, it measures just 6.8mm in height and only weighs a mere 45g, which is suited for ultra-thin computing devices such as Ultrabooks, in addition to mainstream PCs. |
Transcend SSD220 Specs
| Capacity | 240 GB |
| Storage Media | TLC NAND flash memory |
| Certificates | CE, FCC, BSMI |
| Operating Temperature | 32 to 158°F / 0 to 70°C |
| Operating Voltage | 5 VDC |
| Dimensions | 3.9 x 2.8 x 0.3" / 100.0 x 69.9 x 6.8 mm |
| Weight | 2.0 oz / 58.0 g |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Form Factor: M.2 2280
- Interface: PCI-Express 4.0 x4, NVMe 1.3
- Total Capacity: 500GB*
- Sequential Read Speed : up to 5000 MB/s**
- Sequential Write speed : up to 2500 MB/s**
- Wear Leveling, Over-Provision technologies
- TRIM & S.M.A.R.T supported
- Warranty: Limited 5-years
- Form Factor: M.2 2280
- Interface: PCI-Express 4.0 x4, NVMe 1.3
- Total Capacity: 500GB
- Sequential Read Speed: up to 5000 MB/s
- Sequential Write Speed: up to 2500 MB/s
- Wear Leveling, Over-Provision technologies
- TRIM & S.M.A.R.T supported
- Fully Body Copper Heat Spreader
- Warranty: Limited 5-years
- Take advantage of a 5-year limited warranty
- Leverage BarraCuda durability with 1.8M hours MTBF
- IOPS – Random Read (Max IOPS , 4KB QD32) – 90k, Random Write – 90k
- Transfer Speed – Max. Sequential Read Speed 560 MB/s and Write 540 MB/s
- SATA 6 Gb/s interface for optimal performance and compatibility with your PC or laptop
- Form Factor: M.2 2280
- Interface: PCI-Express 4.0 x4, NVMe 1.4
- Total Capacity: 1000GB*
- Sequential Read Speed : up to 7000 MB/s**
- Sequential Write speed : up to 5500 MB/s**
- Wear Leveling, Over-Provision technologies
- TRIM & S.M.A.R.T supported
- AES-256 Supported
- High Efficient Heat Spreader with Nanocarbon Coating
- Warranty: Limited 5-years
- Form Factor: M.2 2280
- Interface: PCI-Express 3.0 x4, NVMe 1.4
- Total Capacity: 1TB*
- Sequential Read Speed : up to 3400 MB/s**
- Sequential Write speed : up to 2500 MB/s**
- HMB (Host Memory Buffer) supported
- TRIM & S.M.A.R.T support
- Energy-Efficient
- 240GB Storage Capacity SSD
- 2.5 inch Form Factor with SATA interface
- SATA III 6Gb/s support
- Sequential Read Speed 500Mb/s*, Write speed 400Mb/s*
- Faster Performance than HDD
- High capacity with enhanced reliability and superior performance for high end computing
- Enhanced power efficiency, leading edge reliability and broad compatibility
- Downloadable WD SSD dashboard and Acronis software, 3 year limited warranty
- Average Active Power: 60mW
- Reliability: Up to 1.75M hours
- Maximum Read Operating: 3000mbps and 3800 maximum write operating
- R/W speed up to 3900/3200MB/s
- Ultra-fast PCIe Gen4x4 interface
- Capacity up to 512GB
- SLC Caching and DRAM cache buffer
- 3D NAND Flash for higher capacity and durability
- Advanced LDPC ECC Technology
- AES 256-bit encryption support
- Compact M.2 2280 form factor – ideal for gaming and high-end desktops
- Boost your system’s performance with next-gen NVMe SSDs.
- Sequential Read Performance: 2400MB/s,
- Sequential Write Performance: 1750MB/s
- Over 4 times faster than our SATA SSDs.
- Slimline M.2 2280 form factor.
- Do more, faster: Western Digital-designed controller and firmware paired with our latest 3D NAND for optimized, consistent performance.
- Western Digital SSD Dashboard constantly monitors the health of your SSD.
- PCIe Gen3x4 interface : read/write up to 3500/2300MB/s
- NVMe 1.3 supported
- Next-generation 3D NAND Flash : Higher capacity, durability, and power efficiency
- M.2 2280 form factor : supports desktops with the latest Intel and AMD platforms
- Built for pros : ideal for gamers, PC enthusiasts, overclockers, and video rendering professional
In stock
- Capacity 128GB
- Package Dimension 100mmx69.9mmx7mm
- Weight 39gm
- Life expectancy of 1 million hours MTBF
- Form Factor 2.5 Inch SATA
- Interface SATA 3.0 Gb/s SATA 6.0 Gb/s
- Sequential Read Speed 500Mb/s*, Write speed 400Mb/s*
- Build for Multitasking- Powered by 4CH SATAIII 6Gb/s controller and high-quality 3D NAND flash, SL100 2.5 delivers sequential read/write speeds up to 560/520MB/s, which means faster performance for everything you do.
- Full Capacity Guaranteed By High Quality 3D TLC NAND- Equipped with best quality 3D TLC NAND, SL300 2.5 provides higher storage density and reliability to maximize potential performance, and prolong the service life of the SSD.
- Ultra low power-draw so you can use your laptop PC for longer periods of time. Shock-resistant and compatibility and reliability.
Reviews
There are no reviews yet