Thermaltake VERSA J25 RGB Cabinet
- 1 tempered glass on the side, tool-free installation, cable management
- I/ O connections 2x USB 3.0 and 1x HD audio
- 1x 120mm fan, 2x 120mm RGB fan
- CPU cooler max. Height: 160mm, PSU max. Length: 160mm, VGA max. Length: 330mm, motherboards: ATX
Original price was: ₹7,000.00.₹5,150.00Current price is: ₹5,150.00.
Thermaltake Versa J25 Tempered Glass RGB Edition Mid-Tower Chassis
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.
3 Built-in 120mm 12V RGB Fans
Thermaltake VERSA J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software.
Built-in RGB Switch Board
Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.
Built-in PSU Cover
The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.
Tempered Glass Window
The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels.
Tool-Free Installation
The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives.
Thermaltake VERSA J25 Superior Hardware Support
Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.
Excellent Cooling Capability
Thermaltake VERSA J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.
Angular, Acrylic Front Panel
The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.
Thermaltake VERSA J25 Handy I/O Ports
The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.
| Model | Versa J25 TG RGB |
| P/N | CA-1L8-00M1WN-01 |
| Case Type | Middle tower |
| Dimension (H x W x D) | 461 x 206 x 402 mm(18.1 x 8.1 x 15.8 inch) |
| Net Weight | 6.2 kg / 13.67 lb |
| Side Panel | 4mm Tempered Glass x1 |
| Color | Exterior & Interior : Black |
| Material | SPCC |
| Cooling System | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) Front (intake) : 120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA) |
| Drive Bays | |
| Accessible | 2 x 2.5”(HDD Bracket) |
| Hidden | 3 x 3.5“ or 2.5” (HDD Tray) |
| Expansion Slots | 7 |
| Motherboards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support | Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support | Front: 1 x 360mm Rear: 1 x 120mm |
| Clearance | CPU cooler height limitation: 160mm VGA length limitation: 330mm PSU length limitation: 160mm |
| Warranty | 3 Years |
| Note | ***Features, Price and Specifications are subject to change without notice. |
| Product Type | |
|---|---|
| Motherboard Size | |
| Lighting Profile | |
| Radiator Size | |
| Brands | |
| Case Form Factor | |
| EAN / UPC Code |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- MSI MAG VAMPIRIC 010X chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- MSI MAG VAMPIRIC 010 chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- Black/Mid-Tower/ Tempered Left Side Pane/ 344 x 196 x 430 mm
- Drive Bays: 3.5 Inch x 2 / 2.5 Inch x 2 I Expansion Slots x 7
- I/O Panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio in, 1 x Mic
- Pre-installed: 3 x 120 mm ARGB Front Fans and 1 x 120 mm Rear Fan
- Liquid Cooling Support: 265 mm VGA Card Length, 160 mm CPU Cooler Height
- Elegant Design: Elegant gloss black design with front mesh panel.
- Spacious Interiors: Can house a long graphics card of up to 410mm in length along with a 360mm radiator.
- Vertical GPU mount: The case has 7 expansion slots and 2 vertical slots for graphics card mount.
- Build-in ARGB Controller: Comes with a build-in controller for easy control over the fans.
- Four A-RGB fans: Comes with Four 120mm auto RGB fans pre-installed in the front and one at the back.
- The MAG FORGE 110R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- The MAG FORGE 111R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- Synergize the MPG GUNGNIR 110M with a MSI motherboard through the USB 3.2 Gen 2 Type-C port.
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 3 Auto RGB fans plus one system fan and has room for up to 6 fans. Fans are Mystic Light compatible.
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- The MPG GUNGNIR 110M’s front features a filtration panel that lets in maximum airflow.
- Modular Radiator Bracket: With a modular bracket, installing an AIO liquid cooler has never been easier.
- Dual Hinged Swing Door: A hinged side door with premium 4mm thick tempered glass design guarantees ease of access and ease of viewing
- Maximum Airflow: 4x 120mm fans ensure your system has even airflow throughout.
- Vertical Graphics Card Support: Equip up to three graphics cards in standard format or one vertically *riser cable sold separately*.
- Tool-Less Tempered Glass Premium-grade 4mm thick tempered glass
- Magnetic Filter – The magnetic dust filter on top is designed to give users an easy un-installing and cleaning experience.
- Can install up to 6x system fans, providing ventilation and stable performance to the whole system.
- Built-in Auto RGB fans with striking lighting and vivid lighting effects.
- The magnetic filter on the top vents being easily remove for cleaning.
- Support up to 300 mm graphics card
- Unorthodox Looks – Stylish front mesh panel with three ARGB 120mm fans for that mean yet clean look.
- Ample Cooling – Can house eight 120mm fans out of which four come pre-installed.
- Dual Dust filters – The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors – Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Black/Mid-Tower/357 x 200 x 438 mm
- Drive Bays: 3.5 Inch x 2 / 2.5 Inch x 2 I Expansion Slots x 7
- Tempered left side Panel with
- I/O Panel: Power Button, Reset Button, 1 x USB 3.0, 2 x USB 2.0, 1 x Audio in, 1 x Mic
- Pre-installed: 2 x 180 mm Rainbow Front Fans and 1 x 120 mm Rear Fan
- Liquid Cooling Support: 310 mm VGA Card Length, 160 mm CPU Cooler Height
Reviews
There are no reviews yet