Lian Li UNI Fan SL120 V2 ARGB White 120mm PWM ARGB Cabinet Fan With ARGB Controller (Triple Pack)
- Improved daisy chain design to connect 2 clusters of fans.
- SL120 V2 fan frame thickness is 28mm to provide 10% improved airflow compared to V1.
- Removable interlocking keys to provide better radiator clearance.
- Start/stop fan RPM support for a quieter environment.
Original price was: ₹13,999.00.₹7,299.00Current price is: ₹7,299.00.
Lian Li UNI Fan SL V2 120 ARGB White – 120mm PWM ARGB Cabinet Fan With ARGB Controller (Triple Pack)
Features
- Improved daisy chain design to connect 2 clusters of fans.
- Lian Li SL120 V2 fan frame thickness is 28mm to provide 10% improved airflow compared to V1.
- Removable interlocking keys to provide better radiator clearance.
- Start/stop fan RPM support for a quieter environment.
- Smoother side lighting for a better aesthetic.
- Only one cable is required for each fan cluster when using the provided new UNI HUB to control lighting effects via L-Connect 3.
UPGRADED MODULARITY
UNI FAN SL V2 revised its interlocking style to connect up to 6 fans in two clusters to a single controller port, making cable management simpler.
Extension Cable
With the new 18 cm extension cable, the ability to bridge two clusters of fans to create a 3+3 daisy-chained cluster is offered. These 6 fans can then be connected to a single port on the SL V2 UNI HUB controller. The new daisy-chaining solution reduces the number of cables needing to be managed at the back of the case and enables new lighting effects which can be continuous between the two bridged clusters.
Plug-in Power Cable Module
The cable module is designed to plug in and sit flush with the fan frame, which doesn’t require extra space for the module and reduces clearance issues with radiator fittings.
Removable Key
The interlocking keys on each fan are removable to improve compatibility with radiator fittings.
IMPROVED PERFORMANCE
Thanks to a slight increase to a 28mm thick frame, the SL120 V2 features a 10% airflow optimization compared to the SL120 V1, which creates a great balance of airflow and static pressure.
MORE SLEEK LIGHTING DESIGN
The cut edge of the rubber pads is designed to create a smoother curve along the light diffuser.
Continuous LED Channel
The light gap between the two fans when interlocked together has been reduced from 5.6mm to 3mm, sketching out the elegant lighting effects.
Dazzling at All Angles
The center of the rear fan has been decorated with an aluminum medallion for an aesthetic look in any orientation.
More Lighting Effect Choices
New lighting effects have been developed for the updated version of the SL fans, offering more lighting options: Render, Tunnel, Voice, and Groove.
Merging Lighting Effects
A merge function is available to allow lighting effects to flow not only across a single cluster but across the whole system.
| Product Type | |
|---|---|
| color | |
| Fan Size | |
| FAN Speed | |
| Case Fan Pack | |
| Brands | |
| EAN / UPC Code |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- The Aer F performance fan is designed to maximize airflow through your build. Engineered to move air efficiently, it features a chamfered intake and exhaust for high volume airflow, and winglet-designed blades to reduce drag. The Aer F uses fluid dynamic bearing to provide silent operations, long-lasting durability, and powerful cooling performance with color customization.
- AER P120 120MM BLUE TRIM 2X
- Aer Trim 120: 118 x 118 x 9.5mm
- Material(s) : Plastic
- 2 Year Warranty
- 16.8 Million Color LED Ring Design
- Switch LED Modes with ARGB Controller
- PWM Controlled Fan with 9 Fan Blade Design
- Hydraulic Bearing with Low-Noise Design
- Size : 120x120x25 mm
- Connector & pin configuration 4-pin PWM
- Low-Noise Adapter (L.N.A.)
- 4 Vibration-Compensators
In stock
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 1500 RPM
- Blade geometry Heptaperf
- Delivers static pressure for AIO liquid coolers
- Seven blades provide powerful airflow
- Frame design with anti-vibration rubber corners dampens noise
- The Fluid Dynamic Bearing offers a 60,000-hour lifespan
- PWM fan for optimized cooling adjustments
- Cooled by Nidec GentleTyphoon
- 4-Pin PWM Connector
- Daisy Chain Capability
- Dual Bearings Efficient and Silent Performanc
- LED ARGB
- Size 120 mm
- Pack Three
- Fan Controller Yes
- Fluid Dynamic bearing
- Built in 10 RGB effects with three button controller
- Compatible with motherboard 5V addressable header
- Fan Speed: 900~1800 RPM
- Max. Air Flow: 57.97 CFM
- Fan Dimension : 120×120×26.5 mm
- FAN Speed : 500~1800 RPM±10% ; Fan Air Flow : 52.5 CFM
- Fan Air Pressure : 2.08 mmAq ; Fan Noise Level: ≤28.8 dB(A)
- Fan Connector : 4-Pin PWM ; FAN Rated Voltage : 12VDC
- FAN Rated Current : 0.18A ; FAN Power Consumption : 2.16W
- It’s part of a triple pack and is known for its high static airflow.
- The fan features 12 Addressable RGB LEDs.
- It ensures high speeds and low noise.
- It’s a great choice for enhancing a PC’s cooling.
- It adds a touch of style with the ARGB lighting.
Octagonal ARGB Lights
Unique and unorthodox octagonal ARGB diffusers on both sides for distinctive looks and even looks.
Hydraulic Bearing Gear Motor
Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Long Life Span
Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
Shock-Absorbing Pads
Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
Reviews
There are no reviews yet