Lian Li Lancool 215 ARGB Cabinet (White)
- Steel 4.0mm tempered glass (both sides) ; (D) 462mm x (W) 215mm x (H) 482mm
- Drive : Behind MB Tray: 2 x 2.5″ SSD Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
- Motherboard : E-ATX(width: under 280mm)/ATX/M-ATX/ITX
- Fan Support : Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm or 2 x 140mm Top of PSU chamber: 2 x 120mm
Original price was: ₹11,599.00.₹6,999.00Current price is: ₹6,999.00.
OPTIMIZED THERMAL MANAGEMENT
Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system.
Included Fans
Pre-installed fans ensure the case runs at peak performance.
Honeycomb vents
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
Ultimate cooling system scenario
With two 200MM fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.
STUNNING PC ILLUMINATION
Move air stylishly with ARGB effects
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
Highlighted logo
The LIAN LI logo glows in sync with the fans.
Experience ARGB control via one button
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
ARGB synchronization with the motherboard
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
Pre-installed fan hub
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
Plenty of space for cable management
The 22MM thick space behind the motherboard ensures the cables fit in well.
Keep the cable nice and neat
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
E-ATX Motherboard Compatible
Fits motherboards with a maximum width of 280MM.
Removable/adjustable cage supports
2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.
| Model | LANCOOL 215 White |
| Dimensions | (D) 462mm x (W) 215mm x (H) 482mm |
| Motherboard | E-ATX(width: under 280mm)/ATX/M-ATX/ITX |
| PSU | 210mm |
| Color | White |
| Materials | 0.75mm SGCC (MB tray, and most of the interior) 4.0mm tempered glass (both sides) |
| Incl Fans | 2 x 200MM 3-PIN 800 RPM ARGB fans (front) 1 X 120MM 3-PIN 1100 RPM Fans (rear) |
| Fan Support | Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm or 2 x 140mm Top of PSU chamber: 2 x 120mm |
| Radiator | Front: 1 x 280/360mm Top: 1 x 240 / 280 mm |
| VGA Length | 370mm |
| CPU Clearance | 166mm |
| Drive | Behind MB Tray: 2 x 2.5″ SSD Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD |
| Slot | 7 |
| I/O Ports | Power button Reset button LED button for lighting mode control 1 x HD AUDIO 2 x USB 3.0 |
| Dust Filters | 1 x Top (magnetic), 1 x Bottom (tray) |
| Warranty | 1 Year |
| Note* | Price, feature and specifications are subject to change without notice |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Modular Radiator Bracket: With a modular bracket, installing an AIO liquid cooler has never been easier.
- Dual Hinged Swing Door: A hinged side door with premium 4mm thick tempered glass design guarantees ease of access and ease of viewing
- Maximum Airflow: 4x 120mm fans ensure your system has even airflow throughout.
- Vertical Graphics Card Support: Equip up to three graphics cards in standard format or one vertically *riser cable sold separately*.
- Tool-Less Tempered Glass Premium-grade 4mm thick tempered glass
- Magnetic Filter – The magnetic dust filter on top is designed to give users an easy un-installing and cleaning experience.
- The MAG FORGE 110R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- Ample of storage options: The case has four exclusive SSD mounts and two HDD cages under the PSU shroud.
- Spacious Interiors: Can house motherboards of up to EATX standards along with a 360mm radiator
- Dual Chamber Design: Separate PSU shroud to assist in cooling as well as in a much cleaner design
- Functional IO Panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button
- Three Auto-RGB fans: Comes with three 120mm Auto-RGB fans pre-installed in the front and one black fan at the back to cut down overall costs of the buyer.
- MSI MAG VAMPIRIC 010 chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- The MAG FORGE 111R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- MSI MAG VAMPIRIC 010X chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- Black/Mid-Tower/ Tempered Left Side Pane/ 344 x 196 x 430 mm
- Drive Bays: 3.5 Inch x 2 / 2.5 Inch x 2 I Expansion Slots x 7
- I/O Panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio in, 1 x Mic
- Pre-installed: 3 x 120 mm ARGB Front Fans and 1 x 120 mm Rear Fan
- Liquid Cooling Support: 265 mm VGA Card Length, 160 mm CPU Cooler Height
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- Macube 110 Refined minimalism design
- Macube 110 Magnetic tempered glass side panel
- Mesh top panel
- Support up to six 120mm or four 140mm cooling fans
- Support radiators up to 280mm on top and in front
- Removable drive cage
- Adjustable GPU holder included
- Synergize MPG SEKIRA 100 Series with an MSI motherboard by bridging a USB Gen2 Type-C port with 10 Gbps for convenient access.
- Mid-Tower gaming PC case that supports E-ATX / ATX / M-ATX / Mini ITX
- The MPG SEKIRA 100R comes with 4 fans and has room for up to 6 fans.
- The top vent lid provides additional system airflow and comes with a magnetic dust filter for easy removal and cleaning.
- A total of three filters have been placed to prevent dust from entering the system.
- Mid-Tower with support for ATX / micro ATX / Mini-ITX Motherboards featuring a brushed aluminium chassis
- Two hinged swing-doors with premium-quality 4mm thick tempered glass design guarantees window durability and viewing capability
- Personalize Your Gaming Rig with a built in 1 to 8 ARGB LED hub and 4 ARGB fans + 1 system fan
- Custom Liquid Cooling Ready features an extractable radiator bracket which supports for radiators up to 360mm in length
- MSI Mystic Light RGB lighting software features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of Mystic Light Sync enabled product
- Preinstalled Fans : Front: 1 x 200mm ARGB LED Fan included, Top: 2 x 200mm ARGB LED Fan included and Rear: 1 x 120mm ARGB LED Fan included
- Black/Mid-Tower/357 x 200 x 438 mm
- Drive Bays: 3.5 Inch x 2 / 2.5 Inch x 2 I Expansion Slots x 7
- Tempered left side Panel with
- I/O Panel: Power Button, Reset Button, 1 x USB 3.0, 2 x USB 2.0, 1 x Audio in, 1 x Mic
- Pre-installed: 2 x 180 mm Rainbow Front Fans and 1 x 120 mm Rear Fan
- Liquid Cooling Support: 310 mm VGA Card Length, 160 mm CPU Cooler Height
Reviews
There are no reviews yet