Antec CX300 RGB Elite Mid Tower Gaming Cabinet
- 3 x 120mm reverse blade RGB fans included
- 1 x 120mm RGB fan included
- Tempered Glass Side and Front Panel
- Panoramic 270° Design
- Vertical airflow design supports up to 10 fans
- Top and Bottom Magnetic Dust Filters
Original price was: ₹5,500.00.₹4,299.00Current price is: ₹4,299.00.
Out of stock
Email when stock available
Antec CX300 RGB ELITE – Mid-Tower Gaming Case – 4mm Tempered Glass Side Panel – Pre-Installed 3x 120mm RGB Fans Reverse + 1x 120mm RGB Fans
Panoramic 270° View
Standing out with full-view design on the seamless 4mm steel-tempered glass, CX300 RGB ELITE’s left and front panel offer an unobstructed view of your build, creating a stunning showcase for your components.
Tool-Free Panels
Front and side panel adopt fixing stud design, which makes assembly and disassembly easier and helps avoid possible glass breakage.
Display with RGB Fans
9 fan positions with 5 pre-installed reverse fans provide great airflow and aesthetic appeal.
Support 2 x Water Cooler
Support simultaneous installation of 360mm radiator on top and 240mm radiator on side. When installing a 240mm radiator on the side, the length of the graphics card is limited to 270mm.
EVA PSU Cushion Pads
With EVA anti-vibration foams on the power supply mount position, your lovely PC hardware is well protected against any jar or resonance caused by PSU operation.
Q & A
YES, THE ANTEC CX300 RGB ELITE MID TOWER GAMING CABINET INCLUDES ARGB FANS; IT COMES WITH 3 X 120MM REVERSE BLADE RGB FANS AND 1 X 120MM RGB FAN, PROVIDING BOTH GREAT AIRFLOW AND AESTHETIC APPEAL.
THE ANTEC CX300 RGB ELITE MID TOWER GAMING CABINET COMES WITH PRE-INSTALLED FANS:
- 3 X 120MM REVERSE BLADE RGB FANS ON THE FRONT PANEL
- 1 X 120MM RGB FAN ON THE REAR PANEL
THE FANS ARE "PRE-CONNECTED FOR EASY INSTALLATION," BUT IT'S NOT EXPLICITLY STATED IF THEY CAN CONNECT TO THE MOTHERBOARD'S RGB HEADER. HOWEVER, IT'S LIKELY THEY CAN, AS THIS IS COMMON FOR RGB CASE FANS.
CONNECTING THE FANS TO THE MOTHERBOARD'S RGB HEADER ALLOWS FOR BETTER CONTROL AND SYNCHRONIZATION OF THE RGB LIGHTING EFFECTS. IF YOU PREFER NOT TO USE THE MOLEX CONNECTOR, CONNECTING THE FANS TO YOUR MOTHERBOARD'S RGB HEADER IS A GOOD ALTERNATIVE. THIS WILL GIVE YOU MORE CONTROL OVER THE RGB LIGHTING AND ENABLE SYNCHRONIZATION WITH OTHER RGB COMPONENTS IN YOUR SYSTEM.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Black/Mid-Tower/ Tempered Left Side Pane/ 344 x 196 x 430 mm
- Drive Bays: 3.5 Inch x 2 / 2.5 Inch x 2 I Expansion Slots x 7
- I/O Panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio in, 1 x Mic
- Pre-installed: 3 x 120 mm ARGB Front Fans and 1 x 120 mm Rear Fan
- Liquid Cooling Support: 265 mm VGA Card Length, 160 mm CPU Cooler Height
- Modular Radiator Bracket: With a modular bracket, installing an AIO liquid cooler has never been easier.
- Dual Hinged Swing Door: A hinged side door with premium 4mm thick tempered glass design guarantees ease of access and ease of viewing
- Maximum Airflow: 4x 120mm fans ensure your system has even airflow throughout.
- Vertical Graphics Card Support: Equip up to three graphics cards in standard format or one vertically *riser cable sold separately*.
- Tool-Less Tempered Glass Premium-grade 4mm thick tempered glass
- Magnetic Filter – The magnetic dust filter on top is designed to give users an easy un-installing and cleaning experience.
- Elegant Design: Elegant gloss black design with front mesh panel.
- Spacious Interiors: Can house a long graphics card of up to 410mm in length along with a 360mm radiator.
- Vertical GPU mount: The case has 7 expansion slots and 2 vertical slots for graphics card mount.
- Build-in ARGB Controller: Comes with a build-in controller for easy control over the fans.
- Four A-RGB fans: Comes with Four 120mm auto RGB fans pre-installed in the front and one at the back.
- Mid-Tower with support for ATX / micro ATX / Mini-ITX Motherboards featuring a brushed aluminium chassis
- Two hinged swing-doors with premium-quality 4mm thick tempered glass design guarantees window durability and viewing capability
- Personalize Your Gaming Rig with a built in 1 to 8 ARGB LED hub and 4 ARGB fans + 1 system fan
- Custom Liquid Cooling Ready features an extractable radiator bracket which supports for radiators up to 360mm in length
- MSI Mystic Light RGB lighting software features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of Mystic Light Sync enabled product
- Preinstalled Fans : Front: 1 x 200mm ARGB LED Fan included, Top: 2 x 200mm ARGB LED Fan included and Rear: 1 x 120mm ARGB LED Fan included
- Matrexx 40 3FS Optimized Micro-ATX design
- Three 120mm tri-color LED fans included
- Tempered glass side panel
- Mesh top and front panel
- Support up to six 120mm or four 140mm cooling fans
- Support for radiators up to 280mm on top and in front
- Removable drive cage
- Awesome front Panel with RGB strip – The front panel is a combination of a matte finish and mesh bottom along with an intricately placed RGB strip for the perfect look.
- Ample Cooling: Can house eight 120mm fans out of which one rear fan comes pre-installed.
- Dual Dust filters: The case comes with two magnetic dust filters, on top and bottom, to keep your build clean and dust-free.
- Spacious interiors: Can accommodate up to 240mm AIO in the front or a 160mm tall air cooler.
- Well populated IO panel: 1 x USB 3.0, 1 x USB 2.0, 1 x Audio, 1 x Mic and Reset button.
- MSI MAG VAMPIRIC 010 chassis can support up to ATX motherboard
- side panel of 4mm tempered glass
- 120 mm ARGB fan
- Reserved cooling space
- Front USB 3.1 Gen 1
- ARGB Fan included
- 4mm Tempered Glasses
- Optimize Airflow
- 360mm Radiator Support
- 167mm CPU Cooler Support
- The MAG FORGE 110R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 RGB fans on Front, 1 Non RGB Rear Fan and 6 Pin RGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
- Multiple Radiator Mounts – For enthusiast-grade cooling dual 360-millimeter radiators are supported on the top and front panel while a single 240mm is supported on the side to keep the most extreme systems cool.
- Large Storage Options – Dual 2.5” SSD mounts and dual 3.5” HDD mounts the Ant Esports 690 Air is ideal to build any gaming or production system.
- Movable Disk Bracket – The HDD cage under the PSU shroud is movable and can be slid towards the front to make space for long PSUs and increase it to 220mm if needed.
- Spacious Interiors – The spacious interior fits upto an E-ATX motherboard configuration. Support for up to a 390mm graphics card, a 175mm CPU cooler, and up to a 220mm PSU in length provides room for upgrades.
- Four Dust Filters – With magnetic dust filters in the front, side, and top along with a pull tray one on the PSU, the 690 Air facilitates high airflow while filtering out dust particles.
- The MAG FORGE 111R’s ARGB lighting is fully supported by MSI Mystic Light.
- Optimize Airflow.
- ARGB Fan included.
- 330 mm Radiator Support.
- 160 mm CPU Cooler Support.
- Deepcool Matrexx 30 The classic M-ATX structure is compatible with M-ATX and ITX motherboards.
- Deepcool Matrexx 30 Equipped larger area of air-intake mesh at front panel.
- Supports 120mm radiator/fan in the front and pre-installed 120mm black fan in the rear.
- The full-sized tempered glass side panel provides optimal view of the interior.
- Removable 5.25 and 3.5 inch installation positions, providing limitless DIY possibilities.
- Compatible with graphics cards up to 250mm.
- The ridge on the back panel provides 14.8 mm of space for cable management.
Reviews
There are no reviews yet