ALSEYE Infinity i12 120mm PC Case Fan (White)
- The i12 case fan adopts a unique design, and the fans are connected to each other with an isomorphic buckle structure, making the fan more integrated. Only one cable is needed to connect to the motherboard, which can effectively reduce the trouble of wiring inside the chassis.
- The i12 PC fan support ARGB lightning effect. You could adjust the lightning effect freely though the software of the MB or the ARGB remote.
- The i12 PC case fan support the PWM function which could auto-adjust the fan speed according to the need.
- The i12 case fan come with a separate connect ARGB & PWM cable to connect the fan with the motherboard.
Original price was: ₹9,199.00.₹3,689.00Current price is: ₹3,689.00.
Feature
Separation design of connecting wire and fan
The 2510 4pin PWM and 5V 3pin ARGB cable is separate from the fan. It also use the snap-in connection structure to connect with the fan which make the inside of the case look more tidy.
Alseye Infinity i12 Case Fan
The i12 case fan uses an ultra-thin bezel design and uses larger fan blades to provide better performance. Metal sheets with logo and model are inlaid on both sides of the frame, which shows the fan texture even more.
ARGB Supported
The RGB lighting can be synchronized with the 5V addressable motherboard and can be easily installed by connecting the standard 5V 3PIN RGB header to the Motherboard ARGB header. It allows you to adjust your prefer rgb lighting effect with your mind.
PWM Supported
It can automatically adjust the fan speed to meet system cooling demands. The i12 fan allows dynamic speed adjustments between 800 and 1,800 revolutions per minute to minimize noise or maximize airflow.
Fans Specification & Details
- Dimensions: 120*120*25mm
- Voltage: DC 12V
- Current: 0.2A±10%
- Fan Speed: 800~1800R.P.M±10%
- Air Flow: 31.18~80.33CFM±10%
- Air Pressure: 0.56~2.46mm/H2O±10%
- Noise Level: 20~36.2dB(A)±10%
- Bearing Type: FDB
Snap-in Connection Structure
The i12 fans are designed with the snap-in connection structure. When you need to install more than one i12 case fan, the fans are connected in series through a snap connection. All fans can be powered, and the fan speed & the lighting effect can be controlled through a single cable.
Frame metal patch decoration
The i12 case fan kit come with two frame metal patch decoration which makes the fan display more metallic.
| Dimensions | 120 x 120 x 25 mm |
| Voltage | DC 12V |
| Current | 0.2A ±10% |
| Fan Speed | 800~1800 RPM ±10% |
| Air Flow | 31.18~80.33 CFM ±10% |
| Air Pressure | 0.56~2.46 mm/H2O ±10% |
| Noise Level | 20~36.2 dB (A) ±10% |
| Bearing Type | Fluid Dynamic Bearing |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Connector & pin- configuration : 4-pin PWM I Rotational speed : 1500 RPM
- Cable length : 40cm I Acoustical noise : 25,8 dB(A)
- Blade geometry : Pressure-optimised Nine-Blade Design with Vortex-Control Notches
- Max. input power : 2, 4 W I Operating voltage : 12V
- 6 Year Warranty
- Size 140x140x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 3000 RPM
- Blade geometry A-Series with Flow Acceleration Channels
In stock
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
- Deepcool RF120 FS Dazzling preset lighting effect (purple/blue/orange) from 6 high-brightness, long-lasting LEDs.
- Optimized 9 fan blades design, balancing air flow and wind pressure.
- PWM smart adjustment technology, effectively reducing wind noise.
- 4-pin power connector for high-performance and stability.
Crystalized ARGB Lights
Unique and unorthodox crystalized ARGB diffusers on both sides fordistinctive looks and even looks.
Hydraulic Bearing Gear Motor
Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Long Life Span
Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
Shock-Absorbing Pads
Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
- The Aer F performance fan is designed to maximize airflow through your build. Engineered to move air efficiently, it features a chamfered intake and exhaust for high volume airflow, and winglet-designed blades to reduce drag. The Aer F uses fluid dynamic bearing to provide silent operations, long-lasting durability, and powerful cooling performance with color customization.
- AER P120 120MM BLUE TRIM 2X
- Aer Trim 120: 118 x 118 x 9.5mm
- Material(s) : Plastic
- 2 Year Warranty
- Powerful and Noiseless: TOUGHFAN 12 Racing Green high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
- The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
- Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed to cover large surface of all corners, maintaining low noise levels when in operation.
- Less turbulence thanks to aerodynamic stator struts
- Supports ASUS AURA, Gigabytes Fusion MSI Mystic Light and others
- Trip Wire provides a micro-turbulent layer for enhanced blade efficiency
- Supports chaining to simplify cable management
- FAN DIMENSION : 120mm x 120mm x 25mm
- RATED VOLTAGE : DC 12V (LED Voltage 5V)
- FAN SPEED : 800±200 (30%DUTY) ~ 1900 RPM±10%
- BEARING TYPE : Fluid Dynamic Bearing (FDB)
- Warranty – 2 Year
- Size 120x120x25 mm
- Connector & pin-configuration 4-pin PWM
- Rotational speed (+/- 10%) 1500 RPM
- Blade geometry Heptaperf
- Rifle Bearing reduced noise spin and great performance
- Efficient 45.3 CFM Air Flow Performance
- 23dBA Fan Operation
- VENTO 120 ARGB Lighting Effects
- 16.8 Million Color LED Ring Design
- Switch LED Modes with ARGB Controller
- PWM Controlled Fan with 9 Fan Blade Design
- Hydraulic Bearing with Low-Noise Design
Reviews
There are no reviews yet